.. include:: global.rst.inc .. highlight:: bash .. _installation: Installation ============ There are different ways to install Borg: - :ref:`distribution-package` - easy and fast if a package is available from your distribution. - :ref:`pyinstaller-binary` - easy and fast, we provide a ready-to-use binary file that comes bundled with all dependencies. - :ref:`source-install`, either: - :ref:`pip-installation` - installing a source package with pip needs more installation steps and requires all dependencies with development headers and a compiler. - :ref:`git-installation` - for developers and power users who want to have the latest code or use revision control (each release is tagged). .. _distribution-package: Distribution Package -------------------- Some distributions might offer a ready-to-use ``borgbackup`` package which can be installed with the package manager. .. important:: Those packages may not be up to date with the latest Borg releases. Before submitting a bug report, check the package version and compare that to our latest release then review :doc:`changes` to see if the bug has been fixed. Report bugs to the package maintainer rather than directly to Borg if the package is out of date in the distribution. .. keep this list in alphabetical order ============ ============================================= ======= Distribution Source Command ============ ============================================= ======= Alpine Linux `Alpine repository`_ ``apk add borgbackup`` Arch Linux `[community]`_ ``pacman -S borg`` Debian `Debian packages`_ ``apt install borgbackup`` Gentoo `ebuild`_ ``emerge borgbackup`` GNU Guix `GNU Guix`_ ``guix package --install borg`` Fedora/RHEL `Fedora official repository`_ ``dnf install borgbackup`` FreeBSD `FreeBSD ports`_ ``cd /usr/ports/archivers/py-borgbackup && make install clean`` macOS `Homebrew`_ ``brew install borgbackup`` Mageia `cauldron`_ ``urpmi borgbackup`` NetBSD `pkgsrc`_ ``pkg_add py-borgbackup`` NixOS `.nix file`_ ``nix-env -i borgbackup`` OpenBSD `OpenBSD ports`_ ``pkg_add borgbackup`` OpenIndiana `OpenIndiana hipster repository`_ ``pkg install borg`` openSUSE `openSUSE official repository`_ ``zypper in borgbackup`` Raspbian `Raspbian testing`_ ``apt install borgbackup`` Ubuntu `Ubuntu packages`_, `Ubuntu PPA`_ ``apt install borgbackup`` ============ ============================================= ======= .. _Alpine repository: https://pkgs.alpinelinux.org/packages?name=borgbackup .. _[community]: https://www.archlinux.org/packages/?name=borg .. _Debian packages: https://packages.debian.org/search?keywords=borgbackup&searchon=names&exact=1&suite=all§ion=all .. _Fedora official repository: https://apps.fedoraproject.org/packages/borgbackup .. _FreeBSD ports: https://www.freshports.org/archivers/py-borgbackup/ .. _ebuild: https://packages.gentoo.org/packages/app-backup/borgbackup .. _GNU Guix: https://www.gnu.org/software/guix/package-list.html#borg .. _pkgsrc: http://pkgsrc.se/sysutils/py-borgbackup .. _cauldron: http://madb.mageia.org/package/show/application/0/release/cauldron/name/borgbackup .. _.nix file: https://github.com/NixOS/nixpkgs/blob/master/pkgs/tools/backup/borg/default.nix .. _OpenBSD ports: https://cvsweb.openbsd.org/cgi-bin/cvsweb/ports/sysutils/borgbackup/ .. _OpenIndiana hipster repository: https://pkg.openindiana.org/hipster/en/search.shtml?token=borg&action=Search .. _openSUSE official repository: https://software.opensuse.org/package/borgbackup .. _Homebrew: https://formulae.brew.sh/formula/borgbackup .. _Raspbian testing: https://archive.raspbian.org/raspbian/pool/main/b/borgbackup/ .. _Ubuntu packages: https://packages.ubuntu.com/xenial/borgbackup .. _Ubuntu PPA: https://launchpad.net/~costamagnagianfranco/+archive/ubuntu/borgbackup Please ask package maintainers to build a package or, if you can package / submit it yourself, please help us with that! See :issue:`105` on github to followup on packaging efforts. .. _pyinstaller-binary: Standalone Binary ----------------- .. note:: Releases are signed with an OpenPGP key, see :ref:`security-contact` for more instructions. Borg x86/x64 amd/intel compatible binaries (generated with `pyinstaller`_) are available on the releases_ page for the following platforms: * **Linux**: glibc >= 2.13 (ok for most supported Linux releases). Older glibc releases are untested and may not work. * **Mac OS X**: 10.10 (does not work with older OS X releases) * **FreeBSD**: 10.2 (unknown whether it works for older releases) ARM binaries are built by Johann Bauer, see: https://borg.bauerj.eu/ To install such a binary, just drop it into a directory in your ``PATH``, make borg readable and executable for its users and then you can run ``borg``:: sudo cp borg-linux64 /usr/local/bin/borg sudo chown root:root /usr/local/bin/borg sudo chmod 755 /usr/local/bin/borg Optionally you can create a symlink to have ``borgfs`` available, which is an alias for ``borg mount``:: ln -s /usr/local/bin/borg /usr/local/bin/borgfs Note that the binary uses /tmp to unpack Borg with all dependencies. It will fail if /tmp has not enough free space or is mounted with the ``noexec`` option. You can change the temporary directory by setting the ``TEMP`` environment variable before running Borg. If a new version is released, you will have to manually download it and replace the old version using the same steps as shown above. .. _pyinstaller: http://www.pyinstaller.org .. _releases: https://github.com/borgbackup/borg/releases .. _source-install: From Source ----------- .. note:: Some older Linux systems (like RHEL/CentOS 5) and Python interpreter binaries compiled to be able to run on such systems (like Python installed via Anaconda) might miss functions required by Borg. This issue will be detected early and Borg will abort with a fatal error. Dependencies ~~~~~~~~~~~~ To install Borg from a source package (including pip), you have to install the following dependencies first: * `Python 3`_ >= 3.6.0, plus development headers. Even though Python 3 is not the default Python version on most systems, it is usually available as an optional install. * OpenSSL_ >= 1.0.0, plus development headers. * libacl_ (which depends on libattr_), both plus development headers. * We have bundled code of the following packages, but borg by default (see setup.py if you want to change that) prefers a shared library if it can be found on the system (lib + dev headers) at build time: - liblz4_ >= 1.7.0 (r129) - libzstd_ >= 1.3.0 - libb2_ >= 0.98.1 (older do not have pkg-config support) * pkg-config (cli tool) and pkgconfig python package (borg uses these to discover header and library location - if it can't import pkgconfig and is not pointed to header/library locations via env vars [see setup.py], it will fall back to using the bundled code, see above). These must be present before invoking setup.py! * some other Python dependencies, pip will automatically install them for you. * optionally, if you wish to mount an archive as a FUSE filesystem, you need a FUSE implementation for Python: - Either pyfuse3_ (preferably, newer and maintained) or llfuse_ (older, unmaintained now). See also the BORG_FUSE_IMPL env variable. - See setup.py about the version requirements. If you have troubles finding the right package names, have a look at the distribution specific sections below or the Vagrantfile in the git repository, which contains installation scripts for a number of operating systems. In the following, the steps needed to install the dependencies are listed for a selection of platforms. If your distribution is not covered by these instructions, try to use your package manager to install the dependencies. On FreeBSD, you may need to get a recent enough OpenSSL version from FreeBSD ports. After you have installed the dependencies, you can proceed with steps outlined under :ref:`pip-installation`. Debian / Ubuntu +++++++++++++++ Install the dependencies with development headers:: sudo apt-get install python3 python3-dev python3-pip python-virtualenv \ libacl1-dev libacl1 \ libssl-dev libb2-dev \ liblz4-dev libzstd-dev \ build-essential \ pkg-config python3-pkgconfig sudo apt-get install libfuse-dev fuse # needed for llfuse sudo apt-get install libfuse3-dev fuse3 # needed for pyfuse3 In case you get complaints about permission denied on ``/etc/fuse.conf``: on Ubuntu this means your user is not in the ``fuse`` group. Add yourself to that group, log out and log in again. Fedora ++++++ Install the dependencies with development headers:: sudo dnf install python3 python3-devel python3-pip python3-virtualenv \ libacl-devel libacl \ openssl-devel libb2-devel \ lz4-devel libzstd-devel \ pkgconf python3-pkgconfig sudo dnf install gcc gcc-c++ redhat-rpm-config sudo dnf install fuse-devel fuse # needed for llfuse sudo dnf install fuse3-devel fuse3 # needed for pyfuse3 openSUSE Tumbleweed / Leap ++++++++++++++++++++++++++ Install the dependencies automatically using zypper:: sudo zypper source-install --build-deps-only borgbackup Alternatively, you can enumerate all build dependencies in the command line:: sudo zypper install python3 python3-devel \ libacl-devel openssl-devel \ python3-Cython python3-Sphinx python3-msgpack-python \ python3-pytest python3-setuptools python3-setuptools_scm \ python3-sphinx_rtd_theme gcc gcc-c++ sudo zypper install python3-llfuse # llfuse Mac OS X ++++++++ When installing via Homebrew_, dependencies are installed automatically. To install dependencies manually:: brew install python3 openssl brew install pkg-config pip3 install virtualenv For FUSE support to mount the backup archives, you need at least version 3.0 of FUSE for OS X, which is available via `github `__, or via Homebrew:: brew cask install osxfuse # needed for llfuse For OS X Catalina and later, be aware that you must authorize full disk access. It is no longer sufficient to run borg backups as root. If you have not yet granted full disk access, and you run Borg backup from cron, you will see messages such as:: /Users/you/Pictures/Photos Library.photoslibrary: scandir: [Errno 1] Operation not permitted: To fix this problem, you should grant full disk acccess to cron, and to your Terminal application. More information `can be found here `__. FreeBSD ++++++++ Listed below are packages you will need to install Borg, its dependencies, and commands to make FUSE work for using the mount command. :: pkg install -y python3 pkgconf pkg install openssl pkg install liblz4 zstd pkg install fusefs-libs # needed for llfuse pkg install -y git python3.5 -m ensurepip # to install pip for Python3 To use the mount command: echo 'fuse_load="YES"' >> /boot/loader.conf echo 'vfs.usermount=1' >> /etc/sysctl.conf kldload fuse sysctl vfs.usermount=1 Windows 10's Linux Subsystem ++++++++++++++++++++++++++++ .. note:: Running under Windows 10's Linux Subsystem is experimental and has not been tested much yet. Just follow the Ubuntu Linux installation steps. You can omit the FUSE stuff, it won't work anyway. Cygwin ++++++ .. note:: Running under Cygwin is experimental and has not been tested much yet. Use the Cygwin installer to install the dependencies:: python3 python3-devel libcrypt-devel python3-setuptools binutils gcc-g++ libopenssl openssl-devel git make openssh You can then install ``pip`` and ``virtualenv``:: easy_install-3.6 pip pip install virtualenv .. _pip-installation: Using pip ~~~~~~~~~ Virtualenv_ can be used to build and install Borg without affecting the system Python or requiring root access. Using a virtual environment is optional, but recommended except for the most simple use cases. .. note:: If you install into a virtual environment, you need to **activate** it first (``source borg-env/bin/activate``), before running ``borg``. Alternatively, symlink ``borg-env/bin/borg`` into some directory that is in your ``PATH`` so you can just run ``borg``. This will use ``pip`` to install the latest release from PyPi:: virtualenv --python=python3 borg-env source borg-env/bin/activate # might be required if your tools are outdated pip install -U pip setuptools wheel # install Borg + Python dependencies into virtualenv pip install borgbackup # or alternatively (if you want FUSE support): pip install borgbackup[llfuse] # to use llfuse pip install borgbackup[pyfuse3] # to use pyfuse3 To upgrade Borg to a new version later, run the following after activating your virtual environment:: pip install -U borgbackup # or ... borgbackup[llfuse/pyfuse3] .. _git-installation: Using git ~~~~~~~~~ This uses latest, unreleased development code from git. While we try not to break master, there are no guarantees on anything. :: # get borg from github git clone https://github.com/borgbackup/borg.git # create a virtual environment virtualenv --python=${which python3} borg-env source borg-env/bin/activate # always before using! # install borg + dependencies into virtualenv cd borg pip install -r requirements.d/development.txt pip install -r requirements.d/docs.txt # optional, to build the docs pip install -e . # in-place editable mode or pip install -e .[pyfuse3] # in-place editable mode, use pyfuse3 or pip install -e .[llfuse] # in-place editable mode, use llfuse # optional: run all the tests, on all supported Python versions # requires fakeroot, available through your package manager fakeroot -u tox By default the system installation of python will be used. If you need to use a different version of Python you can install this using ``pyenv``: :: ... # create a virtual environment pyenv install 3.6.0 pyenv global 3.6.0 pyenv local 3.6.0 virtualenv --python=${pyenv which python} borg-env source borg-env/bin/activate # always before using! ... .. note:: As a developer or power user, you always want to use a virtual environment.