Commit Graph

495 Commits

Author SHA1 Message Date
Matthew Vance 58c7f4694d Update threat model 2021-01-28 14:20:42 +01:00
Michael Eischer 25f4acdaa8 Add changelog entry 2020-12-29 16:32:18 +01:00
Michael Eischer 05a987b07c Support values less than 1 for RESTIC_PROGRESS_FPS
For example set the variable to 0.016666 to print the progress once per
minute.
2020-12-29 16:32:18 +01:00
Michael Eischer 684600cf42 ui: update status for the backup command on non-interactive terminals
Allow the backup command to print status on non-interactive terminals.
The output is disabled by setting a MinUpdatePause == 0.
2020-12-29 16:03:43 +01:00
Michael Eischer c2ef049f1b ui/progress: don't print progress on non-interactive terminals
This reverts to the old behavior of not printing progress updates on
non-interactive terminals. It was accidentally changed in #3058.
2020-12-29 16:03:43 +01:00
Alexander Neumann c661518df9
Merge pull request #2793 from greatroar/rclone-doc
Clarify rclone-over-SSH docs
2020-12-29 10:46:34 +01:00
DRON-666 da9053b184 Some gramma fixes in documentation 2020-12-19 01:16:15 +03:00
DRON-666 ef1aeb8724 dump: Update docs and changelog 2020-12-19 01:09:47 +03:00
Alexander Neumann 1cdd38d9e0
Merge pull request #3165 from restic/2747-doc-forget
doc: Clarify calendar boundaries for --keep-* options
2020-12-16 08:38:03 +01:00
Leo R. Lundgren b3c0d2f45b doc: Clarify calendar boundaries for --keep-* options 2020-12-15 12:43:06 +01:00
Michael Eischer 1d69341e88 swift: Add support for id based keystone v3 auth parameters
This adds support for the following environment variables, which were
previously missing:

OS_USER_ID            User ID for keystone v3 authentication
OS_USER_DOMAIN_ID     User domain ID for keystone v3 authentication
OS_PROJECT_DOMAIN_ID  Project domain ID for keystone v3 authentication
OS_TRUST_ID           Trust ID for keystone v3 authentication
2020-12-11 19:22:34 +01:00
Leo R. Lundgren 61460dee52 doc: Fix misc missing/incorrect text in manual 2020-11-29 18:59:24 +01:00
MichaelEischer 52b98f7f95
Merge pull request #3017 from greatroar/files-from0
Add backup options --files-from-verbatim and --files-from-raw
2020-11-29 18:15:21 +01:00
Leo R. Lundgren f70b10d0ee doc: Emphasize double transfer and duplication in copy command 2020-11-28 19:49:34 +01:00
greatroar 55bf76ba0c backup: Add --files-from-{verbatim,raw} options 2020-11-28 18:22:31 +01:00
Johan Bové c23b1a4cba
Update 04_backup.rst
Fixed typo - _files_ are included from _folders_, not other _files_.
2020-11-20 07:52:23 +01:00
rawtaz 1b6e8c888f
Merge pull request #3102 from tofran/remove-rclone-drive-use-tras-default-param
Remove `--drive-use-trash=false` from rclone param
2020-11-17 11:21:20 +01:00
fgma 8f9cea8cc0 Check data subset: check random percentage subset 2020-11-15 18:13:50 +01:00
Quentin Lemaire e74110a833
docs: Write new entry to changelog/unreleased 2020-11-14 15:48:56 +00:00
tofran 94a154c7ca Remove `--drive-use-trash=false` from rclone param
Google drive trash retention policy changed making this
no longer a good default
a go
Issue #3095
2020-11-13 22:58:48 +00:00
Alexander Neumann 3e0456d88b Highlight that s3.list-objects-v1 is a temporary 2020-11-11 20:11:35 +01:00
Nick Douma f013662e3f Remove separate section on Ceph, and move s3.list-objects-v1 note to S3 section 2020-11-11 15:11:14 +01:00
Nick Douma 354b7e89cc Document the extended s3.list-objects-v1 flag in a new Ceph section 2020-11-11 12:32:46 +01:00
Alexander Weiss fd33030556 Use in-memory index to rebuild index in prune 2020-11-06 20:23:30 +01:00
Nick Craig-Wood 86b5d8ffaa s3: add bucket-lookup parameter to select path or dns style bucket lookup
This is to enable restic working with Alibaba cloud

Fixes #2528
2020-11-05 12:20:10 +01:00
Alexander Neumann 5144141321
Merge pull request #2718 from aawsome/new-cleanup-command
Reimplementation of prune
2020-11-05 10:12:19 +01:00
Alexander Neumann c5300a2c56 Update manpages and auto-completion 2020-11-05 09:41:35 +01:00
Alexander Neumann c1a3de4a6e Refactor max-unused calculation, add `unlimited` option
Add a callback to the PruneOptions struct which calculates the number of
bytes allowed to be unused after prune is done. This way, the logic is
closer to the option parsing code.

Also, add an explicit option `unlimited` for the use case when storage
does not matter but bandwidth and time do. Internally, this sets the
maximum number of unused bytes to MaxUint64.

Rework the documentation slightly so that no more "packs" are
mentioned and it talks about "files" instead.

Make it clear in the documentation that the percentage given to
`--max-unused` is relative to the whole repository size after pruning is
done. If specified, it must be below 100%, otherwise the repository
would contain 100% of unused data, which is pointless.

I had a hard time coming up with the correct formula to calculate the
maximum number of unused bytes based on the number of used bytes. For a
fraction `p` (0 ≤ p < 1), a repo with `u` bytes used, and the number of
unused bytes `x` the following holds:

      x ≤ p * (u+x)
    ⇔ x ≤ p*u + p*x
    ⇔ x - p*x ≤ p*u
    ⇔ x * (1-p) ≤ p*u
    ⇔ x ≤ p/(1-p) * u
2020-11-03 16:42:21 +01:00
Alexander Weiss 7f9a0a5907 Reimplementation of prune 2020-11-03 16:42:21 +01:00
rawtaz e8b4d8d8bc
Merge pull request #2998 from greatroar/env-docs
Systematize documentation of environment variables
2020-10-24 22:49:31 +02:00
MichaelEischer 31b8d7a639
Merge pull request #2274 from fgma/master
Support for Volume Shadow Copy Service (VSS) on windows
2020-10-24 15:43:34 +02:00
fgma 5695f9ebd2 vss: Implement VSS support for Windows
The VSS support works for 32 and 64-bit windows, this includes a check that
the restic version matches the OS architecture as required by VSS. The backup
operation will fail the user has not sufficient permissions to use VSS.

Snapshotting volumes also covers mountpoints but skips UNC paths.
2020-10-24 11:35:57 +02:00
greatroar 8091151638 doc: Update restic mount availability and requirements
NetBSD doesn't support restic mount either, so it's easier to list the
positive cases. Also noted that FUSE for macOS is required on the Mac.
2020-10-22 09:57:30 +02:00
greatroar ae179ee63e Systematize documentation of environment variables
Cache locations were documented inconsistently in three places.

The backup docs mentioned PATH being used to find fusermount, which is
never run by restic backup. It now mentions ssh and rclone, which are
used by backends.

The notion of a "system-wide" environment variable makes no sense.
TMPDIR is now mentioned because it allows for optimization and may
have security implications.
2020-10-22 09:57:30 +02:00
Leo R. Lundgren f500b0d90e doc: Add restic install instructions for Alpine Linux 2020-10-11 18:31:07 +02:00
Alexander Neumann 2f3eeff2e7
Merge pull request #2964 from MichaelEischer/fix-repro-instructions
Fix instructions to reproduce the release binaries
2020-10-09 21:28:24 +02:00
Lorenz Bausch af4100e07d
Replace repo/repos with repository/repositories in --no-lock help text 2020-10-06 22:49:48 +02:00
Michael Eischer 187518a8a3 docs: Properly reproduce zip archives for windows binaries 2020-10-05 18:24:46 +02:00
Michael Eischer a232c833dc docs: Update binary reproduction instructions and refer to older instructions 2020-10-05 18:24:46 +02:00
rawtaz b9b82d878d Add FAQ on whether restic can resume backups
This new FAQ entry explains that restic can resume interrupted backups.
2020-10-03 21:39:45 +02:00
Michael Eischer 7b50a65492 Update backup help output in documentation 2020-10-01 00:50:27 +02:00
Michael Eischer c18b119a9b Document new option --repository-file 2020-10-01 00:50:27 +02:00
Andreas Oberritter 97f7855de3 Add new option --repository-file (default: $RESTIC_REPOSITORY_FILE)
As an alternative to -r, this allows to read the repository URL
from a file in order to prevent certain types of information leaks,
especially for URLs containing credentials.

Fixes #1458, fixes #2900.
2020-10-01 00:50:26 +02:00
MichaelEischer fd02407863
Merge pull request #2849 from classmarkets/gcs-access-token
gs: support authentication with access token
2020-09-30 17:42:56 +02:00
Alexander Neumann c8a94eced7 Update manpages and auto-completion 2020-09-19 17:38:26 +02:00
Alexander Neumann 6ff0082c02
Merge pull request #2928 from MichaelEischer/init-copy-chunker
init: Add `--copy-chunker-parameters` option
2020-09-19 17:32:13 +02:00
Alexander Neumann 95c1d7d959
Merge pull request #2927 from restic/update-deps
Update dependencies
2020-09-19 17:29:35 +02:00
Michael Eischer f003410402 init: Add `--copy-chunker-params` option
This allows creating multiple repositories with identical chunker
parameters which is required for working deduplication when copying
snapshots between different repositories.
2020-09-19 16:53:05 +02:00
Leo R. Lundgren 311ad2d2d0 Improve wording for --password-file and related options 2020-09-19 15:47:32 +02:00
Leo R. Lundgren ffe6dce7e7 Improve wording for --password-command and --password-command2 options 2020-09-19 14:23:25 +02:00