mirror of
https://github.com/restic/restic.git
synced 2024-12-25 17:27:25 +00:00
fa0be82da8
If the service account used with restic does not have the storage.buckets.get permission (in the "Storage Admin" role), Create cannot use Get to determine if the bucket is accessible. Rather than always trying to create the bucket on Get error, gracefully fall back to assuming the bucket is accessible. If it is, restic init will complete successfully. If it is not, it will fail on a later call. Here is what init looks like now in different cases. Service account without "Storage Admin": Bucket exists and is accessible (this is the case that didn't work before): $ ./restic init -r gs:this-bucket-does-exist:/ enter password for new backend: enter password again: created restic backend c02e2edb67 at gs:this-bucket-does-exist:/ Please note that knowledge of your password is required to access the repository. Losing your password means that your data is irrecoverably lost. Bucket exists but is not accessible: $ ./restic init -r gs:this-bucket-does-exist:/ enter password for new backend: enter password again: create key in backend at gs:this-bucket-does-exist:/ failed: service.Objects.Insert: googleapi: Error 403: my-service-account@myproject.iam.gserviceaccount.com does not have storage.objects.create access to object this-bucket-exists/keys/0fa714e695c8ecd58cb467cdeb04d36f3b710f883496a90f23cae0315daf0b93., forbidden Bucket does not exist: $ ./restic init -r gs:this-bucket-does-not-exist:/ create backend at gs:this-bucket-does-not-exist:/ failed: service.Buckets.Insert: googleapi: Error 403: my-service-account@myproject.iam.gserviceaccount.com does not have storage.buckets.create access to bucket this-bucket-does-not-exist., forbidden Service account with "Storage Admin": Bucket exists and is accessible: Same Bucket exists but is not accessible: Same. Previously this would fail when Create tried to create the bucket. Now it fails when trying to create the keys. Bucket does not exist: $ ./restic init -r gs:this-bucket-does-not-exist:/ enter password for new backend: enter password again: created restic backend c3c48b481d at gs:this-bucket-does-not-exist:/ Please note that knowledge of your password is required to access the repository. Losing your password means that your data is irrecoverably lost.
1260 lines
44 KiB
ReStructuredText
1260 lines
44 KiB
ReStructuredText
Manual
|
||
======
|
||
|
||
Usage help
|
||
----------
|
||
|
||
Usage help is available:
|
||
|
||
.. code-block:: console
|
||
|
||
$ ./restic --help
|
||
restic is a backup program which allows saving multiple revisions of files and
|
||
directories in an encrypted repository stored on different backends.
|
||
|
||
Usage:
|
||
restic [command]
|
||
|
||
Available Commands:
|
||
autocomplete Generate shell autocompletion script
|
||
backup Create a new backup of files and/or directories
|
||
cat Print internal objects to stdout
|
||
check Check the repository for errors
|
||
dump Dump data structures
|
||
find Find a file or directory
|
||
forget Remove snapshots from the repository
|
||
help Help about any command
|
||
init Initialize a new repository
|
||
key Manage keys (passwords)
|
||
list List items in the repository
|
||
ls List files in a snapshot
|
||
mount Mount the repository
|
||
prune Remove unneeded data from the repository
|
||
rebuild-index Build a new index file
|
||
restore Extract the data from a snapshot
|
||
snapshots List all snapshots
|
||
tag Modify tags on snapshots
|
||
unlock Remove locks other processes created
|
||
version Print version information
|
||
|
||
Flags:
|
||
--json set output mode to JSON for commands that support it
|
||
--no-lock do not lock the repo, this allows some operations on read-only repos
|
||
-p, --password-file string read the repository password from a file
|
||
-q, --quiet do not output comprehensive progress report
|
||
-r, --repo string repository to backup to or restore from (default: $RESTIC_REPOSITORY)
|
||
|
||
Use "restic [command] --help" for more information about a command.
|
||
|
||
Similar to programs such as ``git``, restic has a number of
|
||
sub-commands. You can see these commands in the listing above. Each
|
||
sub-command may have own command-line options, and there is a help
|
||
option for each command which lists them, e.g. for the ``backup``
|
||
command:
|
||
|
||
.. code-block:: console
|
||
|
||
$ ./restic backup --help
|
||
The "backup" command creates a new snapshot and saves the files and directories
|
||
given as the arguments.
|
||
|
||
Usage:
|
||
restic backup [flags] FILE/DIR [FILE/DIR] ...
|
||
|
||
Flags:
|
||
-e, --exclude pattern exclude a pattern (can be specified multiple times)
|
||
--exclude-file string read exclude patterns from a file
|
||
--files-from string read the files to backup from file (can be combined with file args)
|
||
-f, --force force re-reading the target files/directories. Overrides the "parent" flag
|
||
-x, --one-file-system Exclude other file systems
|
||
--parent string use this parent snapshot (default: last snapshot in the repo that has the same target files/directories)
|
||
--stdin read backup from stdin
|
||
--stdin-filename string file name to use when reading from stdin
|
||
--tag tag add a tag for the new snapshot (can be specified multiple times)
|
||
--time string time of the backup (ex. '2012-11-01 22:08:41') (default: now)
|
||
|
||
Global Flags:
|
||
--json set output mode to JSON for commands that support it
|
||
--no-lock do not lock the repo, this allows some operations on read-only repos
|
||
-p, --password-file string read the repository password from a file
|
||
-q, --quiet do not output comprehensive progress report
|
||
-r, --repo string repository to backup to or restore from (default: $RESTIC_REPOSITORY)
|
||
|
||
Subcommand that support showing progress information such as ``backup``,
|
||
``check`` and ``prune`` will do so unless the quiet flag ``-q`` or
|
||
``--quiet`` is set. When running from a non-interactive console progress
|
||
reporting will be limited to once every 10 seconds to not fill your
|
||
logs.
|
||
|
||
Additionally on Unix systems if ``restic`` receives a SIGUSR signal the
|
||
current progress will written to the standard output so you can check up
|
||
on the status at will.
|
||
|
||
Initialize a repository
|
||
-----------------------
|
||
|
||
First, we need to create a "repository". This is the place where your
|
||
backups will be saved at.
|
||
|
||
Local
|
||
~~~~~
|
||
|
||
In order to create a repository at ``/tmp/backup``, run the following
|
||
command and enter the same password twice:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic init --repo /tmp/backup
|
||
enter password for new backend:
|
||
enter password again:
|
||
created restic backend 085b3c76b9 at /tmp/backup
|
||
Please note that knowledge of your password is required to access the repository.
|
||
Losing your password means that your data is irrecoverably lost.
|
||
|
||
Other backends like sftp and s3 are described in the following
|
||
sections.
|
||
|
||
Remembering your password is important! If you lose it, you won't be
|
||
able to access data stored in the repository.
|
||
|
||
For automated backups, restic accepts the repository location in the
|
||
environment variable ``RESTIC_REPOSITORY``. The password can be read
|
||
from a file (via the option ``--password-file`` or the environment variable
|
||
``RESTIC_PASSWORD_FILE``) or the environment variable ``RESTIC_PASSWORD``.
|
||
|
||
SFTP
|
||
~~~~
|
||
|
||
In order to backup data via SFTP, you must first set up a server with
|
||
SSH and let it know your public key. Passwordless login is really
|
||
important since restic fails to connect to the repository if the server
|
||
prompts for credentials.
|
||
|
||
Once the server is configured, the setup of the SFTP repository can
|
||
simply be achieved by changing the URL scheme in the ``init`` command:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r sftp:user@host:/tmp/backup init
|
||
enter password for new backend:
|
||
enter password again:
|
||
created restic backend f1c6108821 at sftp:user@host:/tmp/backup
|
||
Please note that knowledge of your password is required to access the repository.
|
||
Losing your password means that your data is irrecoverably lost.
|
||
|
||
You can also specify a relative (read: no slash (``/``) character at the
|
||
beginning) directory, in this case the dir is relative to the remote
|
||
user's home directory.
|
||
|
||
The backend config string does not allow specifying a port. If you need
|
||
to contact an sftp server on a different port, you can create an entry
|
||
in the ``ssh`` file, usually located in your user's home directory at
|
||
``~/.ssh/config`` or in ``/etc/ssh/ssh_config``:
|
||
|
||
::
|
||
|
||
Host foo
|
||
User bar
|
||
Port 2222
|
||
|
||
Then use the specified host name ``foo`` normally (you don't need to
|
||
specify the user name in this case):
|
||
|
||
::
|
||
|
||
$ restic -r sftp:foo:/tmp/backup init
|
||
|
||
You can also add an entry with a special host name which does not exist,
|
||
just for use with restic, and use the ``Hostname`` option to set the
|
||
real host name:
|
||
|
||
::
|
||
|
||
Host restic-backup-host
|
||
Hostname foo
|
||
User bar
|
||
Port 2222
|
||
|
||
Then use it in the backend specification:
|
||
|
||
::
|
||
|
||
$ restic -r sftp:restic-backup-host:/tmp/backup init
|
||
|
||
Last, if you'd like to use an entirely different program to create the
|
||
SFTP connection, you can specify the command to be run with the option
|
||
``-o sftp.command="foobar"``.
|
||
|
||
REST Server
|
||
~~~~~~~~~~~
|
||
|
||
In order to backup data to the remote server via HTTP or HTTPS protocol,
|
||
you must first set up a remote `REST
|
||
server <https://github.com/restic/rest-server>`__ instance. Once the
|
||
server is configured, accessing it is achieved by changing the URL
|
||
scheme like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r rest:http://host:8000/
|
||
|
||
Depending on your REST server setup, you can use HTTPS protocol,
|
||
password protection, or multiple repositories. Or any combination of
|
||
those features, as you see fit. TCP/IP port is also configurable. Here
|
||
are some more examples:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r rest:https://host:8000/
|
||
$ restic -r rest:https://user:pass@host:8000/
|
||
$ restic -r rest:https://user:pass@host:8000/my_backup_repo/
|
||
|
||
If you use TLS, make sure your certificates are signed, 'cause restic
|
||
client will refuse to communicate otherwise. It's easy to obtain such
|
||
certificates today, thanks to free certificate authorities like `Let’s
|
||
Encrypt <https://letsencrypt.org/>`__.
|
||
|
||
REST server uses exactly the same directory structure as local backend,
|
||
so you should be able to access it both locally and via HTTP, even
|
||
simultaneously.
|
||
|
||
Amazon S3
|
||
~~~~~~~~~
|
||
|
||
Restic can backup data to any Amazon S3 bucket. However, in this case,
|
||
changing the URL scheme is not enough since Amazon uses special security
|
||
credentials to sign HTTP requests. By consequence, you must first setup
|
||
the following environment variables with the credentials you obtained
|
||
while creating the bucket.
|
||
|
||
.. code-block:: console
|
||
|
||
$ export AWS_ACCESS_KEY_ID=<MY_ACCESS_KEY>
|
||
$ export AWS_SECRET_ACCESS_KEY=<MY_SECRET_ACCESS_KEY>
|
||
|
||
You can then easily initialize a repository that uses your Amazon S3 as
|
||
a backend, if the bucket does not exist yet it will be created in the
|
||
default location:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r s3:s3.amazonaws.com/bucket_name init
|
||
enter password for new backend:
|
||
enter password again:
|
||
created restic backend eefee03bbd at s3:s3.amazonaws.com/bucket_name
|
||
Please note that knowledge of your password is required to access the repository.
|
||
Losing your password means that your data is irrecoverably lost.
|
||
|
||
It is not possible at the moment to have restic create a new bucket in a
|
||
different location, so you need to create it using a different program.
|
||
Afterwards, the S3 server (``s3.amazonaws.com``) will redirect restic to
|
||
the correct endpoint.
|
||
|
||
For an S3-compatible server that is not Amazon (like Minio, see below),
|
||
or is only available via HTTP, you can specify the URL to the server
|
||
like this: ``s3:http://server:port/bucket_name``.
|
||
|
||
Minio Server
|
||
~~~~~~~~~~~~
|
||
|
||
`Minio <https://www.minio.io>`__ is an Open Source Object Storage,
|
||
written in Go and compatible with AWS S3 API.
|
||
|
||
- Download and Install `Minio
|
||
Server <https://minio.io/downloads/#minio-server>`__.
|
||
- You can also refer to https://docs.minio.io for step by step guidance
|
||
on installation and getting started on Minio Client and Minio Server.
|
||
|
||
You must first setup the following environment variables with the
|
||
credentials of your running Minio Server.
|
||
|
||
.. code-block:: console
|
||
|
||
$ export AWS_ACCESS_KEY_ID=<YOUR-MINIO-ACCESS-KEY-ID>
|
||
$ export AWS_SECRET_ACCESS_KEY= <YOUR-MINIO-SECRET-ACCESS-KEY>
|
||
|
||
Now you can easily initialize restic to use Minio server as backend with
|
||
this command.
|
||
|
||
.. code-block:: console
|
||
|
||
$ ./restic -r s3:http://localhost:9000/restic init
|
||
enter password for new backend:
|
||
enter password again:
|
||
created restic backend 6ad29560f5 at s3:http://localhost:9000/restic1
|
||
Please note that knowledge of your password is required to access
|
||
the repository. Losing your password means that your data is irrecoverably lost.
|
||
|
||
OpenStack Swift
|
||
~~~~~~~~~~~~~~~
|
||
|
||
Restic can backup data to an OpenStack Swift container. Because Swift supports
|
||
various authentication methods, credentials are passed through environment
|
||
variables. In order to help integration with existing OpenStack installations,
|
||
the naming convention of those variables follows official python swift client:
|
||
|
||
.. code-block:: console
|
||
|
||
# For keystone v1 authentication
|
||
$ export ST_AUTH=<MY_AUTH_URL>
|
||
$ export ST_USER=<MY_USER_NAME>
|
||
$ export ST_KEY=<MY_USER_PASSWORD>
|
||
|
||
# For keystone v2 authentication (some variables are optional)
|
||
$ export OS_AUTH_URL=<MY_AUTH_URL>
|
||
$ export OS_REGION_NAME=<MY_REGION_NAME>
|
||
$ export OS_USERNAME=<MY_USERNAME>
|
||
$ export OS_PASSWORD=<MY_PASSWORD>
|
||
$ export OS_TENANT_ID=<MY_TENANT_ID>
|
||
$ export OS_TENANT_NAME=<MY_TENANT_NAME>
|
||
|
||
# For keystone v3 authentication (some variables are optional)
|
||
$ export OS_AUTH_URL=<MY_AUTH_URL>
|
||
$ export OS_REGION_NAME=<MY_REGION_NAME>
|
||
$ export OS_USERNAME=<MY_USERNAME>
|
||
$ export OS_PASSWORD=<MY_PASSWORD>
|
||
$ export OS_USER_DOMAIN_NAME=<MY_DOMAIN_NAME>
|
||
$ export OS_PROJECT_NAME=<MY_PROJECT_NAME>
|
||
$ export OS_PROJECT_DOMAIN_NAME=<MY_PROJECT_DOMAIN_NAME>
|
||
|
||
# For authentication based on tokens
|
||
$ export OS_STORAGE_URL=<MY_STORAGE_URL>
|
||
$ export OS_AUTH_TOKEN=<MY_AUTH_TOKEN>
|
||
|
||
|
||
Restic should be compatible with [OpenStack RC
|
||
file](https://docs.openstack.org/user-guide/common/cli-set-environment-variables-using-openstack-rc.html)
|
||
in most cases.
|
||
|
||
Once environment variables are set up, a new repository can be created. The
|
||
name of swift container and optional path can be specified. If
|
||
the container does not exist, it will be created automatically:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r swift:container_name:/path init # path is optional
|
||
enter password for new backend:
|
||
enter password again:
|
||
created restic backend eefee03bbd at swift:container_name:/path
|
||
Please note that knowledge of your password is required to access the repository.
|
||
Losing your password means that your data is irrecoverably lost.
|
||
|
||
The policy of new container created by restic can be changed using environment variable:
|
||
|
||
.. code-block:: console
|
||
|
||
$ export SWIFT_DEFAULT_CONTAINER_POLICY=<MY_CONTAINER_POLICY>
|
||
|
||
|
||
Backblaze B2
|
||
~~~~~~~~~~~~
|
||
|
||
Restic can backup data to any Backblaze B2 bucket. You need to first setup the
|
||
following environment variables with the credentials you obtained when signed
|
||
into your B2 account:
|
||
|
||
.. code-block:: console
|
||
|
||
$ export B2_ACCOUNT_ID=<MY_ACCOUNT_ID>
|
||
$ export B2_ACCOUNT_KEY=<MY_SECRET_ACCOUNT_KEY>
|
||
|
||
You can then easily initialize a repository stored at Backblaze B2. If the
|
||
bucket does not exist yet, it will be created:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r b2:bucketname:path/to/repo init
|
||
enter password for new backend:
|
||
enter password again:
|
||
created restic backend eefee03bbd at b2:bucketname:path/to/repo
|
||
Please note that knowledge of your password is required to access the repository.
|
||
Losing your password means that your data is irrecoverably lost.
|
||
|
||
The number of concurrent connections to the B2 service can be set with the `-o
|
||
b2.connections=10`. By default, at most five parallel connections are
|
||
established.
|
||
|
||
Microsoft Azure Blob Storage
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
You can also store backups on Microsoft Azure Blob Storage. Export the Azure
|
||
account name and key as follows:
|
||
|
||
.. code-block:: console
|
||
|
||
$ export AZURE_ACCOUNT_NAME=<ACCOUNT_NAME>
|
||
$ export AZURE_ACCOUNT_KEY=<SECRET_KEY>
|
||
|
||
Afterwards you can initialize a repository in a container called `foo` in the
|
||
root path like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r azure:foo:/ init
|
||
enter password for new backend:
|
||
enter password again:
|
||
|
||
created restic backend a934bac191 at azure:foo:/
|
||
[...]
|
||
|
||
The number of concurrent connections to the B2 service can be set with the
|
||
`-o azure.connections=10`. By default, at most five parallel connections are
|
||
established.
|
||
|
||
|
||
Google Cloud Storage
|
||
~~~~~~~~~~~~~~~~~~~~
|
||
|
||
Restic supports Google Cloud Storage as a backend.
|
||
|
||
Restic connects to Google Cloud Storage via a `service account`_.
|
||
|
||
For normal restic operation, the service account must have the
|
||
``storage.objects.{create,delete,get,list}`` permissions for the bucket. These
|
||
are included in the "Storage Object Admin" role.
|
||
|
||
``restic init`` can create the repository bucket. Doing so requires the
|
||
``storage.buckets.create`` permission ("Storage Admin" role). If the bucket
|
||
already exists that permission is unnecessary.
|
||
|
||
To use the Google Cloud Storage backend, first `create a service account key`_
|
||
and download the JSON credentials file.
|
||
|
||
Second, find the Google Project ID that you can see in the Google Cloud
|
||
Platform console at the "Storage/Settings" menu. Export the path to the JSON
|
||
key file and the project ID as follows:
|
||
|
||
.. code-block:: console
|
||
|
||
$ export GOOGLE_PROJECT_ID=123123123123
|
||
$ export GOOGLE_APPLICATION_CREDENTIALS=$HOME/.config/gs-secret-restic-key.json
|
||
|
||
Then you can use the ``gs:`` backend type to create a new repository in the
|
||
bucket `foo` at the root path:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r gs:foo:/ init
|
||
enter password for new backend:
|
||
enter password again:
|
||
|
||
created restic backend bde47d6254 at gs:foo:/
|
||
[...]
|
||
|
||
The number of concurrent connections to the GCS service can be set with the
|
||
`-o gs.connections=10`. By default, at most five parallel connections are
|
||
established.
|
||
|
||
.. _service account: https://cloud.google.com/storage/docs/authentication#service_accounts
|
||
.. _create a service account key: https://cloud.google.com/storage/docs/authentication#generating-a-private-key
|
||
|
||
|
||
Password prompt on Windows
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
At the moment, restic only supports the default Windows console
|
||
interaction. If you use emulation environments like
|
||
`MSYS2 <https://msys2.github.io/>`__ or
|
||
`Cygwin <https://www.cygwin.com/>`__, which use terminals like
|
||
``Mintty`` or ``rxvt``, you may get a password error:
|
||
|
||
You can workaround this by using a special tool called ``winpty`` (look
|
||
`here <https://sourceforge.net/p/msys2/wiki/Porting/>`__ and
|
||
`here <https://github.com/rprichard/winpty>`__ for detail information).
|
||
On MSYS2, you can install ``winpty`` as follows:
|
||
|
||
.. code-block:: console
|
||
|
||
$ pacman -S winpty
|
||
$ winpty restic -r /tmp/backup init
|
||
|
||
Create a snapshot
|
||
-----------------
|
||
|
||
Now we're ready to backup some data. The contents of a directory at a
|
||
specific point in time is called a "snapshot" in restic. Run the
|
||
following command and enter the repository password you chose above
|
||
again:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup backup ~/work
|
||
enter password for repository:
|
||
scan [/home/user/work]
|
||
scanned 764 directories, 1816 files in 0:00
|
||
[0:29] 100.00% 54.732 MiB/s 1.582 GiB / 1.582 GiB 2580 / 2580 items 0 errors ETA 0:00
|
||
duration: 0:29, 54.47MiB/s
|
||
snapshot 40dc1520 saved
|
||
|
||
As you can see, restic created a backup of the directory and was pretty
|
||
fast! The specific snapshot just created is identified by a sequence of
|
||
hexadecimal characters, ``40dc1520`` in this case.
|
||
|
||
If you run the command again, restic will create another snapshot of
|
||
your data, but this time it's even faster. This is de-duplication at
|
||
work!
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup backup ~/work
|
||
enter password for repository:
|
||
using parent snapshot 40dc1520aa6a07b7b3ae561786770a01951245d2367241e71e9485f18ae8228c
|
||
scan [/home/user/work]
|
||
scanned 764 directories, 1816 files in 0:00
|
||
[0:00] 100.00% 0B/s 1.582 GiB / 1.582 GiB 2580 / 2580 items 0 errors ETA 0:00
|
||
duration: 0:00, 6572.38MiB/s
|
||
snapshot 79766175 saved
|
||
|
||
You can even backup individual files in the same repository.
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup backup ~/work.txt
|
||
scan [/home/user/work.txt]
|
||
scanned 0 directories, 1 files in 0:00
|
||
[0:00] 100.00% 0B/s 220B / 220B 1 / 1 items 0 errors ETA 0:00
|
||
duration: 0:00, 0.03MiB/s
|
||
snapshot 31f7bd63 saved
|
||
|
||
In fact several hosts may use the same repository to backup directories
|
||
and files leading to a greater de-duplication.
|
||
|
||
Please be aware that when you backup different directories (or the
|
||
directories to be saved have a variable name component like a
|
||
time/date), restic always needs to read all files and only afterwards
|
||
can compute which parts of the files need to be saved. When you backup
|
||
the same directory again (maybe with new or changed files) restic will
|
||
find the old snapshot in the repo and by default only reads those files
|
||
that are new or have been modified since the last snapshot. This is
|
||
decided based on the modify date of the file in the file system.
|
||
|
||
Now is a good time to run ``restic check`` to verify that all data
|
||
is properly stored in the repository. You should run this command regularly
|
||
to make sure the internal structure of the repository is free of errors.
|
||
|
||
You can exclude folders and files by specifying exclude-patterns. Either
|
||
specify them with multiple ``--exclude``'s or one ``--exclude-file``
|
||
|
||
.. code-block:: console
|
||
|
||
$ cat exclude
|
||
# exclude go-files
|
||
*.go
|
||
# exclude foo/x/y/z/bar foo/x/bar foo/bar
|
||
foo/**/bar
|
||
$ restic -r /tmp/backup backup ~/work --exclude=*.c --exclude-file=exclude
|
||
|
||
Patterns use `filepath.Glob <https://golang.org/pkg/path/filepath/#Glob>`__ internally,
|
||
see `filepath.Match <https://golang.org/pkg/path/filepath/#Match>`__ for syntax.
|
||
Additionally ``**`` excludes arbitrary subdirectories.
|
||
Environment-variables in exclude-files are expanded with
|
||
`os.ExpandEnv <https://golang.org/pkg/os/#ExpandEnv>`__.
|
||
|
||
By specifying the option ``--one-file-system`` you can instruct restic
|
||
to only backup files from the file systems the initially specified files
|
||
or directories reside on. For example, calling restic like this won't
|
||
backup ``/sys`` or ``/dev`` on a Linux system:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup backup --one-file-system /
|
||
|
||
By using the ``--files-from`` option you can read the files you want to
|
||
backup from a file. This is especially useful if a lot of files have to
|
||
be backed up that are not in the same folder or are maybe pre-filtered
|
||
by other software.
|
||
|
||
For example maybe you want to backup files that have a certain filename
|
||
in them:
|
||
|
||
.. code-block:: console
|
||
|
||
$ find /tmp/somefiles | grep 'PATTERN' > /tmp/files_to_backup
|
||
|
||
You can then use restic to backup the filtered files:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup backup --files-from /tmp/files_to_backup
|
||
|
||
Incidentally you can also combine ``--files-from`` with the normal files
|
||
args:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup backup --files-from /tmp/files_to_backup /tmp/some_additional_file
|
||
|
||
|
||
Backing up special items
|
||
~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
**Symlinks** are archieved as symlinks, ``restic``does not follow them.
|
||
When you restore, you get the same symlink again, with the same link target
|
||
and the same timestamps.
|
||
|
||
If there is a **bind-mount** below a directory that is to be saved, restic descends into it.
|
||
|
||
**Device files** are saved and restored as device files. This means that e.g. ``/dev/sda`` is
|
||
archived as a block device file and restored as such. This also means that the content of the
|
||
corresponding disk is not read, at least not from the device file.
|
||
|
||
|
||
Reading data from stdin
|
||
~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
Sometimes it can be nice to directly save the output of a program, e.g.
|
||
``mysqldump`` so that the SQL can later be restored. Restic supports
|
||
this mode of operation, just supply the option ``--stdin`` to the
|
||
``backup`` command like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ mysqldump [...] | restic -r /tmp/backup backup --stdin
|
||
|
||
This creates a new snapshot of the output of ``mysqldump``. You can then
|
||
use e.g. the fuse mounting option (see below) to mount the repository
|
||
and read the file.
|
||
|
||
By default, the file name ``stdin`` is used, a different name can be
|
||
specified with ``--stdin-filename``, e.g. like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ mysqldump [...] | restic -r /tmp/backup backup --stdin --stdin-filename production.sql
|
||
|
||
Tags for backup
|
||
~~~~~~~~~~~~~~~
|
||
|
||
Snapshots can have one or more tags, short strings which add identifying
|
||
information. Just specify the tags for a snapshot one by one with ``--tag``:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup backup --tag projectX --tag foo --tag bar ~/work
|
||
[...]
|
||
|
||
The tags can later be used to keep (or forget) snapshots with the ``forget``
|
||
command. The command ``tag`` can be used to modify tags on an existing
|
||
snapshot.
|
||
|
||
List all snapshots
|
||
------------------
|
||
|
||
Now, you can list all the snapshots stored in the repository:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup snapshots
|
||
enter password for repository:
|
||
ID Date Host Tags Directory
|
||
----------------------------------------------------------------------
|
||
40dc1520 2015-05-08 21:38:30 kasimir /home/user/work
|
||
79766175 2015-05-08 21:40:19 kasimir /home/user/work
|
||
bdbd3439 2015-05-08 21:45:17 luigi /home/art
|
||
590c8fc8 2015-05-08 21:47:38 kazik /srv
|
||
9f0bc19e 2015-05-08 21:46:11 luigi /srv
|
||
|
||
You can filter the listing by directory path:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup snapshots --path="/srv"
|
||
enter password for repository:
|
||
ID Date Host Tags Directory
|
||
----------------------------------------------------------------------
|
||
590c8fc8 2015-05-08 21:47:38 kazik /srv
|
||
9f0bc19e 2015-05-08 21:46:11 luigi /srv
|
||
|
||
Or filter by host:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup snapshots --host luigi
|
||
enter password for repository:
|
||
ID Date Host Tags Directory
|
||
----------------------------------------------------------------------
|
||
bdbd3439 2015-05-08 21:45:17 luigi /home/art
|
||
9f0bc19e 2015-05-08 21:46:11 luigi /srv
|
||
|
||
Combining filters is also possible.
|
||
|
||
Restore a snapshot
|
||
------------------
|
||
|
||
Restoring a snapshot is as easy as it sounds, just use the following
|
||
command to restore the contents of the latest snapshot to
|
||
``/tmp/restore-work``:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup restore 79766175 --target /tmp/restore-work
|
||
enter password for repository:
|
||
restoring <Snapshot of [/home/user/work] at 2015-05-08 21:40:19.884408621 +0200 CEST> to /tmp/restore-work
|
||
|
||
Use the word ``latest`` to restore the last backup. You can also combine
|
||
``latest`` with the ``--host`` and ``--path`` filters to choose the last
|
||
backup for a specific host, path or both.
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup restore latest --target /tmp/restore-art --path "/home/art" --host luigi
|
||
enter password for repository:
|
||
restoring <Snapshot of [/home/art] at 2015-05-08 21:45:17.884408621 +0200 CEST> to /tmp/restore-art
|
||
|
||
Use ``--exclude`` and ``--include`` to restrict the restore to a subset of
|
||
files in the snapshot. For example, to restore a single file:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup restore 79766175 --target /tmp/restore-work --include /work/foo
|
||
enter password for repository:
|
||
restoring <Snapshot of [/home/user/work] at 2015-05-08 21:40:19.884408621 +0200 CEST> to /tmp/restore-work
|
||
|
||
This will restore the file ``foo`` to ``/tmp/restore-work/work/foo``.
|
||
|
||
Manage repository keys
|
||
----------------------
|
||
|
||
The ``key`` command allows you to set multiple access keys or passwords
|
||
per repository. In fact, you can use the ``list``, ``add``, ``remove``
|
||
and ``passwd`` sub-commands to manage these keys very precisely:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup key list
|
||
enter password for repository:
|
||
ID User Host Created
|
||
----------------------------------------------------------------------
|
||
*eb78040b username kasimir 2015-08-12 13:29:57
|
||
|
||
$ restic -r /tmp/backup key add
|
||
enter password for repository:
|
||
enter password for new key:
|
||
enter password again:
|
||
saved new key as <Key of username@kasimir, created on 2015-08-12 13:35:05.316831933 +0200 CEST>
|
||
|
||
$ restic -r backup key list
|
||
enter password for repository:
|
||
ID User Host Created
|
||
----------------------------------------------------------------------
|
||
5c657874 username kasimir 2015-08-12 13:35:05
|
||
*eb78040b username kasimir 2015-08-12 13:29:57
|
||
|
||
Manage tags
|
||
-----------
|
||
|
||
Managing tags on snapshots is done with the ``tag`` command. The
|
||
existing set of tags can be replaced completely, tags can be added to
|
||
removed. The result is directly visible in the ``snapshots`` command.
|
||
|
||
Let's say we want to tag snapshot ``590c8fc8`` with the tags ``NL`` and
|
||
``CH`` and remove all other tags that may be present, the following
|
||
command does that:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup tag --set NL --set CH 590c8fc8
|
||
Create exclusive lock for repository
|
||
Modified tags on 1 snapshots
|
||
|
||
Note the snapshot ID has changed, so between each change we need to look
|
||
up the new ID of the snapshot. But there is an even better way, the
|
||
``tag`` command accepts ``--tag`` for a filter, so we can filter
|
||
snapshots based on the tag we just added.
|
||
|
||
So we can add and remove tags incrementally like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup tag --tag NL --remove CH
|
||
Create exclusive lock for repository
|
||
Modified tags on 1 snapshots
|
||
|
||
$ restic -r /tmp/backup tag --tag NL --add UK
|
||
Create exclusive lock for repository
|
||
Modified tags on 1 snapshots
|
||
|
||
$ restic -r /tmp/backup tag --tag NL --remove NL
|
||
Create exclusive lock for repository
|
||
Modified tags on 1 snapshots
|
||
|
||
$ restic -r /tmp/backup tag --tag NL --add SOMETHING
|
||
No snapshots were modified
|
||
|
||
Check integrity and consistency
|
||
-------------------------------
|
||
|
||
Imagine your repository is saved on a server that has a faulty hard
|
||
drive, or even worse, attackers get privileged access and modify your
|
||
backup with the intention to make you restore malicious data:
|
||
|
||
.. code-block:: console
|
||
|
||
$ sudo echo "boom" >> backup/index/d795ffa99a8ab8f8e42cec1f814df4e48b8f49129360fb57613df93739faee97
|
||
|
||
In order to detect these things, it is a good idea to regularly use the
|
||
``check`` command to test whether everything is alright, your precious
|
||
backup data is consistent and the integrity is unharmed:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup check
|
||
Load indexes
|
||
ciphertext verification failed
|
||
|
||
Trying to restore a snapshot which has been modified as shown above will
|
||
yield the same error:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup restore 79766175 --target /tmp/restore-work
|
||
Load indexes
|
||
ciphertext verification failed
|
||
|
||
Mount a repository
|
||
------------------
|
||
|
||
Browsing your backup as a regular file system is also very easy. First,
|
||
create a mount point such as ``/mnt/restic`` and then use the following
|
||
command to serve the repository with FUSE:
|
||
|
||
.. code-block:: console
|
||
|
||
$ mkdir /mnt/restic
|
||
$ restic -r /tmp/backup mount /mnt/restic
|
||
enter password for repository:
|
||
Now serving /tmp/backup at /mnt/restic
|
||
Don't forget to umount after quitting!
|
||
|
||
Mounting repositories via FUSE is not possible on Windows and OpenBSD.
|
||
|
||
Restic supports storage and preservation of hard links. However, since
|
||
hard links exist in the scope of a filesystem by definition, restoring
|
||
hard links from a fuse mount should be done by a program that preserves
|
||
hard links. A program that does so is rsync, used with the option
|
||
--hard-links.
|
||
|
||
Removing old snapshots
|
||
----------------------
|
||
|
||
All backup space is finite, so restic allows removing old snapshots.
|
||
This can be done either manually (by specifying a snapshot ID to remove)
|
||
or by using a policy that describes which snapshots to forget. For all
|
||
remove operations, two commands need to be called in sequence:
|
||
``forget`` to remove a snapshot and ``prune`` to actually remove the
|
||
data that was referenced by the snapshot from the repository. This can
|
||
be automated with the ``--prune`` option of the ``forget`` command,
|
||
which runs ``prune`` automatically if snapshots have been removed.
|
||
|
||
It is advisable to run ``restic check`` after pruning, to make sure
|
||
you are alerted, should the internal data structures of the repository
|
||
be damaged.
|
||
|
||
Remove a single snapshot
|
||
~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
The command ``snapshots`` can be used to list all snapshots in a
|
||
repository like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup snapshots
|
||
enter password for repository:
|
||
ID Date Host Tags Directory
|
||
----------------------------------------------------------------------
|
||
40dc1520 2015-05-08 21:38:30 kasimir /home/user/work
|
||
79766175 2015-05-08 21:40:19 kasimir /home/user/work
|
||
bdbd3439 2015-05-08 21:45:17 luigi /home/art
|
||
590c8fc8 2015-05-08 21:47:38 kazik /srv
|
||
9f0bc19e 2015-05-08 21:46:11 luigi /srv
|
||
|
||
In order to remove the snapshot of ``/home/art``, use the ``forget``
|
||
command and specify the snapshot ID on the command line:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup forget bdbd3439
|
||
enter password for repository:
|
||
removed snapshot d3f01f63
|
||
|
||
Afterwards this snapshot is removed:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup snapshots
|
||
enter password for repository:
|
||
ID Date Host Tags Directory
|
||
----------------------------------------------------------------------
|
||
40dc1520 2015-05-08 21:38:30 kasimir /home/user/work
|
||
79766175 2015-05-08 21:40:19 kasimir /home/user/work
|
||
590c8fc8 2015-05-08 21:47:38 kazik /srv
|
||
9f0bc19e 2015-05-08 21:46:11 luigi /srv
|
||
|
||
But the data that was referenced by files in this snapshot is still
|
||
stored in the repository. To cleanup unreferenced data, the ``prune``
|
||
command must be run:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup prune
|
||
enter password for repository:
|
||
|
||
counting files in repo
|
||
building new index for repo
|
||
[0:00] 100.00% 22 / 22 files
|
||
repository contains 22 packs (8512 blobs) with 100.092 MiB bytes
|
||
processed 8512 blobs: 0 duplicate blobs, 0B duplicate
|
||
load all snapshots
|
||
find data that is still in use for 1 snapshots
|
||
[0:00] 100.00% 1 / 1 snapshots
|
||
found 8433 of 8512 data blobs still in use
|
||
will rewrite 3 packs
|
||
creating new index
|
||
[0:00] 86.36% 19 / 22 files
|
||
saved new index as 544a5084
|
||
done
|
||
|
||
Afterwards the repository is smaller.
|
||
|
||
You can automate this two-step process by using the ``--prune`` switch
|
||
to ``forget``:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic forget --keep-last 1 --prune
|
||
snapshots for host mopped, directories /home/user/work:
|
||
|
||
keep 1 snapshots:
|
||
ID Date Host Tags Directory
|
||
----------------------------------------------------------------------
|
||
4bba301e 2017-02-21 10:49:18 mopped /home/user/work
|
||
|
||
remove 1 snapshots:
|
||
ID Date Host Tags Directory
|
||
----------------------------------------------------------------------
|
||
8c02b94b 2017-02-21 10:48:33 mopped /home/user/work
|
||
|
||
1 snapshots have been removed, running prune
|
||
counting files in repo
|
||
building new index for repo
|
||
[0:00] 100.00% 37 / 37 packs
|
||
repository contains 37 packs (5521 blobs) with 151.012 MiB bytes
|
||
processed 5521 blobs: 0 duplicate blobs, 0B duplicate
|
||
load all snapshots
|
||
find data that is still in use for 1 snapshots
|
||
[0:00] 100.00% 1 / 1 snapshots
|
||
found 5323 of 5521 data blobs still in use, removing 198 blobs
|
||
will delete 0 packs and rewrite 27 packs, this frees 22.106 MiB
|
||
creating new index
|
||
[0:00] 100.00% 30 / 30 packs
|
||
saved new index as b49f3e68
|
||
done
|
||
|
||
Removing snapshots according to a policy
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
Removing snapshots manually is tedious and error-prone, therefore restic
|
||
allows specifying which snapshots should be removed automatically
|
||
according to a policy. You can specify how many hourly, daily, weekly,
|
||
monthly and yearly snapshots to keep, any other snapshots are removed.
|
||
The most important command-line parameter here is ``--dry-run`` which
|
||
instructs restic to not remove anything but print which snapshots would
|
||
be removed.
|
||
|
||
When ``forget`` is run with a policy, restic loads the list of all
|
||
snapshots, then groups these by host name and list of directories. The grouping
|
||
options can be set with ``--group-by``, to only group snapshots by paths and
|
||
tags use ``--group-by paths,tags``. The policy is then applied to each group of
|
||
snapshots separately. This is a safety feature.
|
||
|
||
The ``forget`` command accepts the following parameters:
|
||
|
||
- ``--keep-last n`` never delete the ``n`` last (most recent) snapshots
|
||
- ``--keep-hourly n`` for the last ``n`` hours in which a snapshot was
|
||
made, keep only the last snapshot for each hour.
|
||
- ``--keep-daily n`` for the last ``n`` days which have one or more
|
||
snapshots, only keep the last one for that day.
|
||
- ``--keep-weekly n`` for the last ``n`` weeks which have one or more
|
||
snapshots, only keep the last one for that week.
|
||
- ``--keep-monthly n`` for the last ``n`` months which have one or more
|
||
snapshots, only keep the last one for that month.
|
||
- ``--keep-yearly n`` for the last ``n`` years which have one or more
|
||
snapshots, only keep the last one for that year.
|
||
- ``--keep-tag`` keep all snapshots which have all tags specified by
|
||
this option (can be specified multiple times).
|
||
|
||
Additionally, you can restrict removing snapshots to those which have a
|
||
particular hostname with the ``--hostname`` parameter, or tags with the
|
||
``--tag`` option. When multiple tags are specified, only the snapshots
|
||
which have all the tags are considered. For example, the following command
|
||
removes all but the latest snapshot of all snapshots that have the tag ``foo``:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic forget --tag foo --keep-last 1
|
||
|
||
This command removes all but the last snapshot of all snapshots that have
|
||
either the ``foo`` or ``bar`` tag set:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic forget --tag foo --tag bar --keep-last 1
|
||
|
||
To only keep the last snapshot of all snapshots with both the tag ``foo`` and
|
||
``bar`` set use:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic forget --tag foo,tag bar --keep-last 1
|
||
|
||
All the ``--keep-*`` options above only count
|
||
hours/days/weeks/months/years which have a snapshot, so those without a
|
||
snapshot are ignored.
|
||
|
||
All snapshots are evaluated counted against all matching keep-* counts. A
|
||
single snapshot on 2017-09-30 (Sun) will count as a daily, weekly and monthly.
|
||
|
||
Let's explain this with an example: Suppose you have only made a backup
|
||
on each Sunday for 12 weeks. Then ``forget --keep-daily 4`` will keep
|
||
the last four snapshots for the last four Sundays, but remove the rest.
|
||
Only counting the days which have a backup and ignore the ones without
|
||
is a safety feature: it prevents restic from removing many snapshots
|
||
when no new ones are created. If it was implemented otherwise, running
|
||
``forget --keep-daily 4`` on a Friday would remove all snapshots!
|
||
|
||
Another example: Suppose you make daily backups for 100 years. Then
|
||
``forget --keep-daily 7 --keep-weekly 5 --keep-monthly 12 --keep-yearly 75``
|
||
will keep the most recent 7 daily snapshots, then 4 (remember, 7 dailies
|
||
already include a week!) last-day-of-the-weeks and 11 or 12
|
||
last-day-of-the-months (11 or 12 depends if the 5 weeklies cross a month).
|
||
And finally 75 last-day-of-the-year snapshots. All other snapshots are
|
||
removed.
|
||
|
||
Autocompletion
|
||
--------------
|
||
|
||
Restic can write out a bash compatible autocompletion script:
|
||
|
||
.. code-block:: console
|
||
|
||
$ ./restic autocomplete --help
|
||
The "autocomplete" command generates a shell autocompletion script.
|
||
|
||
NOTE: The current version supports Bash only.
|
||
This should work for *nix systems with Bash installed.
|
||
|
||
By default, the file is written directly to ``/etc/bash_completion.d/``
|
||
for convenience, and the command may need superuser rights, e.g.
|
||
|
||
.. code-block:: console
|
||
|
||
$ sudo restic autocomplete
|
||
|
||
Usage:
|
||
restic autocomplete [flags]
|
||
|
||
Flags:
|
||
--completionfile string autocompletion file (default "/etc/bash_completion.d/restic.sh")
|
||
|
||
Global Flags:
|
||
--json set output mode to JSON for commands that support it
|
||
--no-lock do not lock the repo, this allows some operations on read-only repos
|
||
-o, --option key=value set extended option (key=value, can be specified multiple times)
|
||
-p, --password-file string read the repository password from a file
|
||
-q, --quiet do not output comprehensive progress report
|
||
-r, --repo string repository to backup to or restore from (default: $RESTIC_REPOSITORY)
|
||
|
||
Debugging
|
||
---------
|
||
|
||
The program can be built with debug support like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ go run build.go -tags debug
|
||
|
||
Afterwards, extensive debug messages are written to the file in
|
||
environment variable ``DEBUG_LOG``, e.g.:
|
||
|
||
.. code-block:: console
|
||
|
||
$ DEBUG_LOG=/tmp/restic-debug.log restic backup ~/work
|
||
|
||
If you suspect that there is a bug, you can have a look at the debug
|
||
log. Please be aware that the debug log might contain sensitive
|
||
information such as file and directory names.
|
||
|
||
The debug log will always contain all log messages restic generates. You
|
||
can also instruct restic to print some or all debug messages to stderr.
|
||
These can also be limited to e.g. a list of source files or a list of
|
||
patterns for function names. The patterns are globbing patterns (see the
|
||
documentation for `path.Glob <https://golang.org/pkg/path/#Glob>`__), multiple
|
||
patterns are separated by commas. Patterns are case sensitive.
|
||
|
||
Printing all log messages to the console can be achieved by setting the
|
||
file filter to ``*``:
|
||
|
||
.. code-block:: console
|
||
|
||
$ DEBUG_FILES=* restic check
|
||
|
||
If you want restic to just print all debug log messages from the files
|
||
``main.go`` and ``lock.go``, set the environment variable
|
||
``DEBUG_FILES`` like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ DEBUG_FILES=main.go,lock.go restic check
|
||
|
||
The following command line instructs restic to only print debug
|
||
statements originating in functions that match the pattern ``*unlock*``
|
||
(case sensitive):
|
||
|
||
.. code-block:: console
|
||
|
||
$ DEBUG_FUNCS=*unlock* restic check
|
||
|
||
Under the hood
|
||
--------------
|
||
|
||
Browse repository objects
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
||
Internally, a repository stores data of several different types
|
||
described in the `design
|
||
documentation <https://github.com/restic/restic/blob/master/doc/Design.rst>`__.
|
||
You can ``list`` objects such as blobs, packs, index, snapshots, keys or
|
||
locks with the following command:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup list snapshots
|
||
d369ccc7d126594950bf74f0a348d5d98d9e99f3215082eb69bf02dc9b3e464c
|
||
|
||
The ``find`` command searches for a given
|
||
`pattern <http://golang.org/pkg/path/filepath/#Match>`__ in the
|
||
repository.
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r backup find test.txt
|
||
debug log file restic.log
|
||
debug enabled
|
||
enter password for repository:
|
||
found 1 matching entries in snapshot 196bc5760c909a7681647949e80e5448e276521489558525680acf1bd428af36
|
||
-rw-r--r-- 501 20 5 2015-08-26 14:09:57 +0200 CEST path/to/test.txt
|
||
|
||
The ``cat`` command allows you to display the JSON representation of the
|
||
objects or its raw content.
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup cat snapshot d369ccc7d126594950bf74f0a348d5d98d9e99f3215082eb69bf02dc9b3e464c
|
||
enter password for repository:
|
||
{
|
||
"time": "2015-08-12T12:52:44.091448856+02:00",
|
||
"tree": "05cec17e8d3349f402576d02576a2971fc0d9f9776ce2f441c7010849c4ff5af",
|
||
"paths": [
|
||
"/home/user/work"
|
||
],
|
||
"hostname": "kasimir",
|
||
"username": "username",
|
||
"uid": 501,
|
||
"gid": 20
|
||
}
|
||
|
||
Metadata handling
|
||
~~~~~~~~~~~~~~~~~
|
||
|
||
Restic saves and restores most default attributes, including extended attributes like ACLs.
|
||
Sparse files are not handled in a special way yet, and aren't restored.
|
||
|
||
The following metadata is handled by restic:
|
||
|
||
- Name
|
||
- Type
|
||
- Mode
|
||
- ModTime
|
||
- AccessTime
|
||
- ChangeTime
|
||
- UID
|
||
- GID
|
||
- User
|
||
- Group
|
||
- Inode
|
||
- Size
|
||
- Links
|
||
- LinkTarget
|
||
- Device
|
||
- Content
|
||
- Subtree
|
||
- ExtendedAttributes
|
||
|
||
Scripting
|
||
---------
|
||
|
||
Restic supports the output of some commands in JSON format, the JSON
|
||
data can then be processed by other programs (e.g.
|
||
`jq <https://stedolan.github.io/jq/>`__). The following example
|
||
lists all snapshots as JSON and uses ``jq`` to pretty-print the result:
|
||
|
||
.. code-block:: console
|
||
|
||
$ restic -r /tmp/backup snapshots --json | jq .
|
||
[
|
||
{
|
||
"time": "2017-03-11T09:57:43.26630619+01:00",
|
||
"tree": "bf25241679533df554fc0fd0ae6dbb9dcf1859a13f2bc9dd4543c354eff6c464",
|
||
"paths": [
|
||
"/home/work/doc"
|
||
],
|
||
"hostname": "kasimir",
|
||
"username": "fd0",
|
||
"uid": 1000,
|
||
"gid": 100,
|
||
"id": "bbeed6d28159aa384d1ccc6fa0b540644b1b9599b162d2972acda86b1b80f89e"
|
||
},
|
||
{
|
||
"time": "2017-03-11T09:58:57.541446938+01:00",
|
||
"tree": "7f8c95d3420baaac28dc51609796ae0e0ecfb4862b609a9f38ffaf7ae2d758da",
|
||
"paths": [
|
||
"/home/user/shared"
|
||
],
|
||
"hostname": "kasimir",
|
||
"username": "fd0",
|
||
"uid": 1000,
|
||
"gid": 100,
|
||
"id": "b157d91c16f0ba56801ece3a708dfc53791fe2a97e827090d6ed9a69a6ebdca0"
|
||
}
|
||
]
|
||
|
||
Temporary files
|
||
---------------
|
||
|
||
During some operations (e.g. ``backup`` and ``prune``) restic uses
|
||
temporary files to store data. These files will, by default, be saved to
|
||
the system's temporary directory, on Linux this is usually located in
|
||
``/tmp/``. The environment variable ``TMPDIR`` can be used to specify a
|
||
different directory, e.g. to use the directory ``/var/tmp/restic-tmp``
|
||
instead of the default, set the environment variable like this:
|
||
|
||
.. code-block:: console
|
||
|
||
$ export TMPDIR=/var/tmp/restic-tmp
|
||
$ restic -r /tmp/backup backup ~/work
|
||
|
||
Caching
|
||
-------
|
||
|
||
Restic keeps a cache with some files from the repository on the local machine.
|
||
This allows faster operations, since meta data does not need to be loaded from
|
||
a remote repository. The cache is automatically created, usually in the
|
||
directory ``.cache/restic`` in the user's home directory. The environment
|
||
variable ``XDG_CACHE_DIR`` or the command line parameter ``--cache-dir`` can
|
||
each be used to specify where the cache is located. The parameter
|
||
``--no-cache`` disables the cache entirely. In this case, all data is loaded
|
||
from the repo.
|
||
|
||
The cache is ephemeral: When a file cannot be read from the cache, it is loaded
|
||
from the repository.
|
||
|