transmission/docs/Building-Transmission.md

214 lines
6.5 KiB
Markdown
Raw Normal View History

2022-02-21 16:39:27 +00:00
## Getting the Source ##
The source code for both official and nightly releases can be found on our [download page](https://transmissionbt.com/download/).
2022-02-21 16:39:27 +00:00
2022-04-26 14:11:44 +00:00
## On macOS ##
Software prerequisites:
2022-04-26 14:11:44 +00:00
* macOS 10.14.4 or newer
* Xcode 11.3.1 or newer
2022-02-21 16:39:27 +00:00
Building the project on Mac requires the source to be retrieved from GitHub. Pre-packaged source code will not compile.
```bash
git clone --recurse-submodules https://github.com/transmission/transmission Transmission
```
2022-02-21 16:39:27 +00:00
If building from source is too daunting for you, check out the [nightly builds](https://build.transmissionbt.com/job/trunk-mac/).
2022-02-21 16:39:27 +00:00
(Note: These are untested snapshots. Use them with care.)
### Building the native app with Xcode ###
Transmission has an Xcode project file for building in Xcode.
- Open Transmission.xcodeproj
- Run the Transmission scheme
### Building the native app with CMake ###
Build the app:
```bash
cmake -B build -G Ninja -DCMAKE_BUILD_TYPE=RelWithDebInfo
cmake --build build -t transmission-mac
open ./build/macosx/Transmission.app
```
### Building the GTK app with CMake ###
Install GTK and build the app:
```bash
brew install gtk4 gtkmm4
cmake -B build -G Ninja -DCMAKE_BUILD_TYPE=RelWithDebInfo -DENABLE_GTK=ON -DENABLE_MAC=OFF
cmake --build build -t transmission-gtk
./build/gtk/transmission-gtk
```
### Building the QT app with CMake ###
Install QT and build the app:
```bash
brew install qt
brew services start dbus
cmake -B build -G Ninja -DCMAKE_BUILD_TYPE=RelWithDebInfo -DENABLE_QT=ON -DENABLE_MAC=OFF
cmake --build build -t transmission-qt
./build/qt/transmission-qt
```
2022-02-21 16:39:27 +00:00
## On Unix ##
### Prerequisites ###
#### Debian 12 / Bookworm ####
On Debian, you can build transmission with a few dependencies on top of a base installation.
For building transmission-daemon you will need basic dependencies:
```bash
$ sudo apt install build-essential cmake git libcurl4-openssl-dev libssl-dev
```
These packages are not mandatory for a working binary. Transmission brings its own libraries if they aren't installed, except for `libsystemd-dev`.
```bash
$ sudo apt install libb64-dev libdeflate-dev libevent-dev libminiupnpc-dev libnatpmp-dev libpsl-dev libsystemd-dev
```
You likely want to install transmission as a native GUI application.
There are two options, GTK and Qt.
GTK 3 client:
```bash
$ sudo apt install gettext libgtkmm-3.0-dev
```
Qt5 client:
```bash
$ sudo apt install libqt5svg5-dev qttools5-dev
```
Qt6 client:
```bash
$ sudo apt install qt6-svg-dev qt6-tools-dev
```
Then you can begin [building.](#building-transmission-from-git-first-time)
#### Debian 11 / Bullseye ####
On Debian, you can build transmission with a few dependencies on top of a base installation.
For building transmission-daemon you will need basic dependencies
```bash
$ sudo apt install git build-essential cmake libcurl4-openssl-dev libssl-dev python3
2022-02-21 16:39:27 +00:00
```
You likely want to install transmission as a native GUI application. There are two options, GTK and Qt.
2022-02-21 16:39:27 +00:00
For GTK 3 client, two additional packages are required
```bash
$ sudo apt install libgtkmm-3.0-dev gettext
```
For Qt client, one additional package is needed on top of basic dependencies
```bash
$ sudo apt install qttools5-dev
```
2022-02-21 16:39:27 +00:00
Then you can begin [building.](#building-transmission-from-git-first-time)
2022-02-21 16:39:27 +00:00
#### Ubuntu ####
On Ubuntu, you can install the required development tools for GTK with this command:
2022-02-21 16:39:27 +00:00
```bash
$ sudo apt-get install build-essential automake autoconf libtool pkg-config intltool libcurl4-openssl-dev libglib2.0-dev libevent-dev libminiupnpc-dev libgtk-3-dev libappindicator3-dev libssl-dev
```
2022-02-21 16:39:27 +00:00
Then you can begin [building.](#building-transmission-from-git-first-time)
2022-02-21 16:39:27 +00:00
#### CentOS 5.4 ####
The packages you need are:
* gcc
* gcc-c++
* m4
* make
* automake
* libtool
* gettext
* openssl-devel
Or simply run the following command:
```bash
2022-02-21 16:39:27 +00:00
$ yum install gcc gcc-c++ m4 make automake libtool gettext openssl-devel
```
However, Transmission needs other packages unavailable in `yum`:
* [pkg-config](https://pkg-config.freedesktop.org/wiki/)
* [libcurl](https://curl.haxx.se/)
* [intltool](https://ftp.gnome.org/pub/gnome/sources/intltool/)
2022-02-21 16:39:27 +00:00
Before building Transmission, you need to set the pkgconfig environment setting:
```bash
2022-02-21 16:39:27 +00:00
$ export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
```
### Building Transmission from Git (first time) ###
```bash
$ git clone --recurse-submodules https://github.com/transmission/transmission Transmission
2022-02-21 16:39:27 +00:00
$ cd Transmission
# Use -DCMAKE_BUILD_TYPE=RelWithDebInfo to build optimized binary with debug information. (preferred)
# Use -DCMAKE_BUILD_TYPE=Release to build full optimized binary.
$ cmake -B build -DCMAKE_BUILD_TYPE=RelWithDebInfo
2022-02-21 16:39:27 +00:00
$ cd build
$ cmake --build .
$ sudo cmake --install .
2022-02-21 16:39:27 +00:00
```
### Building Transmission from Git (updating) ###
```bash
2022-02-21 16:39:27 +00:00
$ cd Transmission/build
$ cmake --build . -t clean
$ git submodule foreach --recursive git clean -xfd
2022-02-21 16:39:27 +00:00
$ git pull --rebase --prune
$ git submodule update --init --recursive
$ cmake --build .
$ sudo cmake --install .
2022-02-21 16:39:27 +00:00
```
## On Windows ##
### Prerequisites
You need the following installed:
2022-02-21 16:39:27 +00:00
* [Visual Studio 2019 or greater](https://visualstudio.microsoft.com/downloads/) (the Community Edition is sufficient)
* install the "Desktop Development with C++" workload
* install the ATL and MFC components (only needed by the Qt client)
* [CMake](https://cmake.org/download/) (choose to add CMake to your path)
* [Git for Windows](https://git-scm.com/download/win)
* [Vcpkg](https://github.com/microsoft/vcpkg#quick-start-windows)
* [Python](https://python.org/downloads)
2022-02-21 16:39:27 +00:00
### Install dependencies through vcpkg
2022-02-21 16:39:27 +00:00
Vcpkg will install x86 libraries by default. To install x64 add the `--triplet=x64-windows` flag at the end of the commands below.
Common dependencies:
```bat
vcpkg install curl zlib openssl
```
Additional dependencies for the Qt client:
```bat
vcpkg install qt5-tools qt5-winextras
```
2022-02-21 16:39:27 +00:00
### Get Transmission source
```bat
git clone https://github.com/transmission/transmission
cd transmission
git submodule update --init --recursive
```
### Configure CMake and build the project
To configure which components are built use the flags below.
Each option can be set to `ON` or `OFF`, values shown below are the defaults.
* `-DENABLE_DAEMON=ON` - build transmission daemon
* `-DENABLE_QT=AUTO` - build the Qt client
* `-DENABLE_UTILS=ON` - build transmission-remote, transmission-create, transmission-edit and transmission-show cli tools
* `-DENABLE_CLI=OFF` - build the cli client
```bat
cmake -B build -DCMAKE_TOOLCHAIN_FILE="<path-to-vcpkg>\scripts\buildsystems\vcpkg.cmake" <flags-from-above> <other-cmake-configurations>
```
To build the project run:
```bat
cmake --build build
```