transmission/third-party/miniupnp/upnpcommands.h

186 lines
6.5 KiB
C

/* $Id: upnpcommands.h,v 1.16 2008/10/14 18:05:28 nanard Exp $ */
/* Miniupnp project : http://miniupnp.free.fr/
* Author : Thomas Bernard
* Copyright (c) 2005-2008 Thomas Bernard
* This software is subject to the conditions detailed in the
* LICENCE file provided within this distribution */
#ifndef __UPNPCOMMANDS_H__
#define __UPNPCOMMANDS_H__
#include "upnpreplyparse.h"
#include "declspec.h"
/* MiniUPnPc return codes : */
#define UPNPCOMMAND_SUCCESS (0)
#define UPNPCOMMAND_UNKNOWN_ERROR (-1)
#define UPNPCOMMAND_INVALID_ARGS (-2)
#ifdef __cplusplus
extern "C" {
#endif
LIBSPEC unsigned int
UPNP_GetTotalBytesSent(const char * controlURL,
const char * servicetype);
LIBSPEC unsigned int
UPNP_GetTotalBytesReceived(const char * controlURL,
const char * servicetype);
LIBSPEC unsigned int
UPNP_GetTotalPacketsSent(const char * controlURL,
const char * servicetype);
LIBSPEC unsigned int
UPNP_GetTotalPacketsReceived(const char * controlURL,
const char * servicetype);
/* UPNP_GetStatusInfo()
* status and lastconnerror are 64 byte buffers
* Return values :
* UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR
* or a UPnP Error code */
LIBSPEC int
UPNP_GetStatusInfo(const char * controlURL,
const char * servicetype,
char * status,
unsigned int * uptime,
char * lastconnerror);
/* UPNP_GetConnectionTypeInfo()
* argument connectionType is a 64 character buffer
* Return Values :
* UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR
* or a UPnP Error code */
LIBSPEC int
UPNP_GetConnectionTypeInfo(const char * controlURL,
const char * servicetype,
char * connectionType);
/* UPNP_GetExternalIPAddress() call the corresponding UPNP method.
* if the third arg is not null the value is copied to it.
* at least 16 bytes must be available
*
* Return values :
* 0 : SUCCESS
* NON ZERO : ERROR Either an UPnP error code or an unknown error.
*
* possible UPnP Errors :
* 402 Invalid Args - See UPnP Device Architecture section on Control.
* 501 Action Failed - See UPnP Device Architecture section on Control. */
LIBSPEC int
UPNP_GetExternalIPAddress(const char * controlURL,
const char * servicetype,
char * extIpAdd);
/* UPNP_GetLinkLayerMaxBitRates()
* call WANCommonInterfaceConfig:1#GetCommonLinkProperties
*
* return values :
* UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR
* or a UPnP Error Code. */
LIBSPEC int
UPNP_GetLinkLayerMaxBitRates(const char* controlURL,
const char* servicetype,
unsigned int * bitrateDown,
unsigned int * bitrateUp);
/* UPNP_AddPortMapping()
* if desc is NULL, it will be defaulted to "libminiupnpc"
* remoteHost is usually NULL because IGD don't support it.
*
* Return values :
* 0 : SUCCESS
* NON ZERO : ERROR. Either an UPnP error code or an unknown error.
*
* List of possible UPnP errors for AddPortMapping :
* errorCode errorDescription (short) - Description (long)
* 402 Invalid Args - See UPnP Device Architecture section on Control.
* 501 Action Failed - See UPnP Device Architecture section on Control.
* 715 WildCardNotPermittedInSrcIP - The source IP address cannot be
* wild-carded
* 716 WildCardNotPermittedInExtPort - The external port cannot be wild-carded
* 718 ConflictInMappingEntry - The port mapping entry specified conflicts
* with a mapping assigned previously to another client
* 724 SamePortValuesRequired - Internal and External port values
* must be the same
* 725 OnlyPermanentLeasesSupported - The NAT implementation only supports
* permanent lease times on port mappings
* 726 RemoteHostOnlySupportsWildcard - RemoteHost must be a wildcard
* and cannot be a specific IP address or DNS name
* 727 ExternalPortOnlySupportsWildcard - ExternalPort must be a wildcard and
* cannot be a specific port value */
LIBSPEC int
UPNP_AddPortMapping(const char * controlURL, const char * servicetype,
const char * extPort,
const char * inPort,
const char * inClient,
const char * desc,
const char * proto,
const char * remoteHost);
/* UPNP_DeletePortMapping()
* Use same argument values as what was used for AddPortMapping().
* remoteHost is usually NULL because IGD don't support it.
* Return Values :
* 0 : SUCCESS
* NON ZERO : error. Either an UPnP error code or an undefined error.
*
* List of possible UPnP errors for DeletePortMapping :
* 402 Invalid Args - See UPnP Device Architecture section on Control.
* 714 NoSuchEntryInArray - The specified value does not exist in the array */
LIBSPEC int
UPNP_DeletePortMapping(const char * controlURL, const char * servicetype,
const char * extPort, const char * proto,
const char * remoteHost);
/* UPNP_GetPortMappingNumberOfEntries()
* not supported by all routers */
LIBSPEC int
UPNP_GetPortMappingNumberOfEntries(const char* controlURL, const char* servicetype, unsigned int * num);
/* UPNP_GetSpecificPortMappingEntry retrieves an existing port mapping
* the result is returned in the intClient and intPort strings
* please provide 16 and 6 bytes of data
*
* return value :
* UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR
* or a UPnP Error Code. */
LIBSPEC int
UPNP_GetSpecificPortMappingEntry(const char * controlURL,
const char * servicetype,
const char * extPort,
const char * proto,
char * intClient,
char * intPort);
/* UPNP_GetGenericPortMappingEntry()
*
* return value :
* UPNPCOMMAND_SUCCESS, UPNPCOMMAND_INVALID_ARGS, UPNPCOMMAND_UNKNOWN_ERROR
* or a UPnP Error Code.
*
* Possible UPNP Error codes :
* 402 Invalid Args - See UPnP Device Architecture section on Control.
* 713 SpecifiedArrayIndexInvalid - The specified array index is out of bounds
*/
LIBSPEC int
UPNP_GetGenericPortMappingEntry(const char * controlURL,
const char * servicetype,
const char * index,
char * extPort,
char * intClient,
char * intPort,
char * protocol,
char * desc,
char * enabled,
char * rHost,
char * duration);
#ifdef __cplusplus
}
#endif
#endif