176 lines
6.7 KiB
Plaintext
176 lines
6.7 KiB
Plaintext
######################################################
|
|
### ----- Message Stream Encryption protocol ----- ###
|
|
### specification by Ludde/uau/The_8472/Parg/Nolar ###
|
|
######################################################
|
|
|
|
The following protocol describes a transparent wrapper for bidirectional
|
|
data streams (e.g. TCP transports) that prevents passive eavesdroping
|
|
and thus protocol or content identification.
|
|
|
|
It is also designed to provide limited protection against active MITM attacks
|
|
and portscanning by requiring a weak shared secret to complete the handshake.
|
|
You should note that the major design goal was payload and protocol obfuscation,
|
|
not peer authentication and data integrity verification. Thus it does not offer
|
|
protection against adversaries which already know the necessary data to establish
|
|
connections (that is IP/Port/Shared Secret/Payload protocol).
|
|
|
|
To minimize the load on systems that employ this protocol fast cryptographic
|
|
methods have been chosen over maximum-security algorithms.
|
|
|
|
|
|
----------------
|
|
- Declarations -
|
|
----------------
|
|
|
|
The entire handshake is in big-endian.
|
|
The crypto handshake is transparent to the next upper protocol,
|
|
thus the payload endianness doesn't matter.
|
|
|
|
|
|
A is the initiator of the underlying transport (e.g. a TCP connection)
|
|
B is the receiver
|
|
|
|
##### DH Parameters
|
|
|
|
Prime P is a 768 bit safe prime, "0xFFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A63A36210000000000090563"
|
|
Generator G is "2"
|
|
|
|
Xa and Xb are a variable size random integers.
|
|
They are the private key for each side and have to be discarded after
|
|
the DH handshake is done. Minimum length is 128 bit. Anything beyond 180 bit
|
|
is not believed to add any further security and only increases the necessary
|
|
calculation time. You should use a length of 160bits whenever possible, lower
|
|
values may be used when CPU time is scarce.
|
|
|
|
Pubkey of A: Ya = (G^Xa) mod P
|
|
Pubkey of B: Yb = (G^Xb) mod P
|
|
|
|
DH secret: S = (Ya^Xb) mod P = (Yb^Xa) mod P
|
|
|
|
P, S, Ya and Yb are 768bits long
|
|
|
|
##### Constants/Variables
|
|
|
|
|
|
PadA, PadB: Random data with a random length of 0 to 512 bytes each
|
|
|
|
PadC, PadD: Arbitrary data with a length of 0 to 512 bytes, can be
|
|
used to extend the crypto handshake in future versions.
|
|
Current implementations may choose to set them to 0-length.
|
|
For padding-only usage in the current version they should be zeroed.
|
|
|
|
|
|
VC is a verification constant that is used to verify whether the other
|
|
side knows S and SKEY and thus defeats replay attacks of the SKEY hash.
|
|
As of this version VC is a String of 8 bytes set to 0x00.
|
|
|
|
|
|
crypto_provide and crypto_select are a 32bit bitfields.
|
|
As of now 0x01 means plaintext, 0x02 means RC4. (see Functions)
|
|
The remaining bits are reserved for future use.
|
|
|
|
The initiating peer A should provide all methods he supports in the bitfield,
|
|
but he may choose only to provide higher encryption levels e.g. if plaintext
|
|
isn't sufficient for it's security needs.
|
|
The responding peer B should set a bit corresponding to the single method
|
|
which he selected from the provided ones.
|
|
|
|
Bits with an unknown meaning in crypto_provide and crypto_select
|
|
should be ignored as they might be used in future versions.
|
|
|
|
|
|
|
|
|
|
|
|
SKEY = Stream Identifier/Shared secret used to drop connections early if we
|
|
don't have a matching stream. It's additionally used to harden the protocol
|
|
against MITM attacks and portscanning.
|
|
Protocols w/o unique stream properties may use a constant.
|
|
Note: For BitTorrent, the SKEY should be the torrent info hash.
|
|
|
|
|
|
IA = initial payload data from A
|
|
may be 0-sized if you want to wait for the encryption negotation.
|
|
|
|
Peer A may buffer up to 65535 bytes before or during the DH handshake to append
|
|
it to the 3rd step. IA is considered as atomic and thus an implementation may
|
|
not expect that anything is handed to the upper layer before IA is completely
|
|
transmitted. Thus there must be no blocking operations within IA.
|
|
|
|
Note, Example for Bittorrent:
|
|
After \19Bittorrent protocol + the BT handshake a block occurs since A waits
|
|
for B to send his handshake before A continues to send his bitfield,
|
|
thus IA can only include the prefix + the bt handshake but not the bitfield
|
|
|
|
|
|
###### Functions
|
|
|
|
len(X) specifies the length of X in 2 bytes.
|
|
Thus the maximum length that can be specified is 65535 bytes, this is
|
|
important for the IA block.
|
|
|
|
|
|
ENCRYPT() is RC4, that uses one of the following keys to send data:
|
|
"HASH('keyA', S, SKEY)" if you're A
|
|
"HASH('keyB', S, SKEY)" if you're B
|
|
The first 1024 bytes of the RC4 output are discarded.
|
|
consecutive calls to ENCRYPT() by one side continue the encryption
|
|
stream (no reinitialization, no keychange). They are only used to distinguish
|
|
semantically seperate content.
|
|
|
|
|
|
ENCRYPT2() is the negotiated crypto method.
|
|
Current options are:
|
|
0x01 Plaintext. After the specified length (see IA/IB) each side sends unencrypted payload
|
|
0x02 RC4-128. The ENCRYPT() RC4 encoding is continued (no reinitialization, no keychange)
|
|
|
|
|
|
HASH() is SHA1 binary output (20 bytes)
|
|
|
|
|
|
###### The handshake "packet" format
|
|
|
|
|
|
The handshake is seperated into 5 blocking steps.
|
|
|
|
1 A->B: Diffie Hellman Ya, PadA
|
|
2 B->A: Diffie Hellman Yb, PadB
|
|
3 A->B: HASH('req1', S), HASH('req2', SKEY) xor HASH('req3', S), ENCRYPT(VC, crypto_provide, len(PadC), PadC, len(IA)), ENCRYPT(IA)
|
|
4 B->A: ENCRYPT(VC, crypto_select, len(padD), padD), ENCRYPT2(Payload Stream)
|
|
5 A->B: ENCRYPT2(Payload Stream)
|
|
|
|
|
|
Since the length of PadA and PadB are unknown
|
|
B will be able to resynchronize on HASH('req1', S)
|
|
A will be able to resynchronize on ENCRYPT(VC)
|
|
|
|
|
|
##### Optional early termination conditions
|
|
(should verified before the indicated step is started).
|
|
|
|
If a fail-fast behavior is prefered the following conditions can be used to
|
|
disconnect the peer immediately. If less recognizable patterns are preferred
|
|
a peer may wait and disconnect at a later point. If any of these conditions
|
|
are met the handshake can be considered as invalid.
|
|
|
|
2 (termination by B)
|
|
if A sent less than 96 Bytes within 30 seconds
|
|
if A sent more than 608 bytes
|
|
|
|
3 (termination by A)
|
|
if B sent less than 96 Bytes within 30 seconds
|
|
if B sent more than 608 bytes
|
|
|
|
4 (termination by B)
|
|
if A didn't send the correct S hash within 628 bytes after the connection start (synchronisation point)
|
|
if A didn't send a supported SKEY hash after the S hash
|
|
if VC can't be decoded correctly after the SKEY hash
|
|
if none of the crypto_provide options are supported or the bitfield is zeroed
|
|
from here on it's up to the next protocol layer to terminate the connection
|
|
|
|
5 (termination by A)
|
|
if VC can't be decoded correctly within 616 bytes after the connection start (synchronisation point)
|
|
if the selected crypto method wasn't provided
|
|
from here on it's up to the next protocol layer to terminate the connection
|
|
|