Michael Eischer
550d1eeac3
repository: remove SaveIndex from interface
...
The method is now only indirectly accessible via Prune or RepairIndex.
2024-05-24 21:33:17 +02:00
Michael Eischer
fb59e00614
index: rewrite MasterIndex load/save test to be independent of repository
2024-05-24 21:33:17 +02:00
Michael Eischer
447b486c20
index: deduplicate index loading of check and repository
2024-05-24 21:33:17 +02:00
Michael Eischer
6ca12c1b4a
archiver: replace most uses of restic.Repository
2024-05-24 21:33:17 +02:00
Michael Eischer
864995271e
repository: unwrap BlobHandle parameters of LookupBlob
...
The method now uses the same parameters as LookupBlobSize.
2024-05-24 21:33:17 +02:00
Michael Eischer
1266a4932f
repository: fix parameter order of LookupBlobSize
...
All methods should use blobType followed by ID.
2024-05-24 21:33:17 +02:00
Michael Eischer
e848ad651a
restic: name parameters in restic interface
2024-05-24 21:33:17 +02:00
Michael Eischer
0bb0720348
test cleanups
2024-05-24 21:33:17 +02:00
Michael Eischer
c01bcb1001
archiver: remove unused masterIndex from test
2024-05-24 21:33:17 +02:00
Michael Eischer
0aa5c53842
repository: replace HasBlob with LookupBlobSize
2024-05-24 21:33:17 +02:00
Michael Eischer
8f1e70cd9b
repository: remove clearIndex and packSize from public interface
2024-05-24 21:33:17 +02:00
Michael Eischer
4df887406f
repository: inline MasterIndex interface into Repository interface
2024-05-24 21:33:17 +02:00
Michael Eischer
3eeb6723cd
Merge pull request #4764 from MichaelEischer/safe-keep-tag
...
Prevent unsafe uses of `forget --keep-tag`
2024-05-24 20:51:20 +02:00
Michael Eischer
3cc6827f09
forget: add feature flag for safe --keep-tags behavior
2024-05-24 20:45:33 +02:00
Michael Eischer
7948912b31
document --unsafe-allow-remove-all option
2024-05-24 20:45:33 +02:00
Michael Eischer
3f46808898
add forget safety net changelogs
2024-05-24 20:45:33 +02:00
Michael Eischer
82ca0030b7
forget: test --unsafe-allow-remove-all and --keep-tags safety check
2024-05-24 20:45:33 +02:00
Michael Eischer
57f9739573
forget: Add --unsafe-allow-remove-all option
...
To prevent accidentally wiping all snapshots from a repository, that
option can only be used if either a snapshot filter or a keep policy is
specified.
Essentially, the option allows `forget --tag something
--unsafe-allow-remove-all` calls to remove all snapshots with a specific
tag.
2024-05-24 20:45:33 +02:00
Michael Eischer
5b7952e426
forget: return error if no policy was specified
2024-05-24 20:45:33 +02:00
Michael Eischer
c0e1f36830
forget: refuse deleting the last snapshot in a snapshot group
...
`--keep-tag invalid-tag` was previously able to wipe all snapshots in a
repository. As a user specified a `--keep-*` option this is likely
unintentional. This forbid deleting all snapshot if a `--keep-*` option
was specified to prevent data loss. (Not specifying such an option
currently also causes the command to abort)
2024-05-24 20:45:33 +02:00
Michael Eischer
d106ad6921
restic: regenerate snapshot keep policy golden test files
2024-05-24 20:45:33 +02:00
Michael Eischer
16ef4d515b
Merge pull request #4784 from MichaelEischer/rework-backend-retries
...
Rework backend retries
2024-05-24 20:29:54 +02:00
Michael Eischer
e4a48085ae
backend/retry: feature flag new retry behavior
2024-05-24 20:24:02 +02:00
Michael Eischer
723247c8e5
add changelog for longer retries
2024-05-24 20:24:02 +02:00
Michael Eischer
b1266867d2
repository: wait max 1 minutes for lock removal if context is canceled
...
The toplevel context in restic only canceled if the user interrupts a
restic operation. If the network connection has failed this can require
waiting the full retry duration of 15 minutes which is a bad user
experience for interactive usage. Thus limit the delay to one minute in
this case.
2024-05-24 20:24:02 +02:00
Michael Eischer
98709a4372
retry: reduce total number of retries
...
Retries in restic try to solve two main problems:
- retry a temporarily failed operation
- tolerate temporary network interruptions
The first problem only requires a few retries, whereas the last one benefits
primarily from spreading the requests over a longer duration.
Increasing the default multiplier and the initial interval works for
both cases. The first few retries only take a few seconds, while later
retries quickly reach the maximum interval of one minute. This ensures
that the total number of retries issued by restic will remain at around
21 retries for a 15 minute period. As the concurrency in restic is
bounded, retries drastically reduce the number of requests sent to a
backend. This helps to prevent overloading the backend.
2024-05-24 20:24:02 +02:00
Michael Eischer
512cd6ef07
retry: ensure that there's always at least one retry
...
Previously, if an operation failed after 15 minutes, then it would never
be retried. This means that large backend requests are more unreliable
than smaller ones.
2024-05-24 20:24:02 +02:00
Michael Eischer
a60ee9b764
retry: limit retries based on elapsed time not count
...
Depending on how long an operation takes to fail, the total retry
duration can currently vary between 1.5 and 15 minutes. In particular
for temporarily interrupted network connections, the former timeout is
too short. Thus always use a limit of 15 minutes.
2024-05-24 20:24:02 +02:00
Michael Eischer
a3633cad9e
retry: explicitly log failed requests
...
This simplifies finding the request in the log output that cause an
operation to fail.
2024-05-24 20:24:02 +02:00
Michael Eischer
b9cbf623fa
Merge pull request #4814 from MichaelEischer/fix-tmp-docs
...
doc: fix tmpdir documentation for windows
2024-05-24 18:17:59 +02:00
Michael Eischer
4021e67d97
doc: fix tmpdir documentation for windows
2024-05-20 20:48:29 +02:00
Michael Eischer
8898f61717
Merge pull request #4809 from MichaelEischer/update-changelog
...
add retries for corrupted blobs to changelog
2024-05-18 23:04:13 +02:00
Michael Eischer
5f23baabcc
add retries for corrupted blobs to changelog
2024-05-18 23:03:24 +02:00
Michael Eischer
9c5bac6f25
Merge pull request #4799 from letmaik/letmaik/azure-force-cli-credential
...
Azure: add option to force use of CLI credential
2024-05-18 20:22:15 +00:00
Michael Eischer
c56ecec9aa
azure: deduplicate cli and default credentials case
2024-05-18 22:15:54 +02:00
Maik Riechert
355f520936
Azure: add option to force use of CLI credential
2024-05-18 22:15:54 +02:00
Michael Eischer
1dfe1b8732
Merge pull request #4802 from MichaelEischer/backend-cleanups
...
Repository: Remove Backend() method
2024-05-18 22:02:45 +02:00
Michael Eischer
223aa22cb0
replace some uses of restic.Repository with finegrained interfaces
2024-05-18 21:42:51 +02:00
Michael Eischer
291c9677de
restic/repository: remove Backend() method
2024-05-18 21:42:51 +02:00
Michael Eischer
673496b091
repository: clean cache between CheckPack retries
...
The cache cleanup pattern is also used in ListPack etc.
2024-05-18 21:42:51 +02:00
Michael Eischer
3d2410ed50
Replace some repo.RemoveUnpacked usages
...
These will eventually be blocked as they do not delete Snapshots.
2024-05-18 21:42:51 +02:00
Michael Eischer
d2c26e33f3
repository: remove further usages of repo.Backend()
2024-05-18 21:42:51 +02:00
Michael Eischer
8a425c2f0a
remove usages of repo.Backend() from tests
2024-05-18 21:42:51 +02:00
Michael Eischer
aa4647f773
repository: unexport PackBlobIterator
2024-05-18 21:42:51 +02:00
Michael Eischer
94e863885c
check: move verification of individual pack file to repository
2024-05-18 21:42:50 +02:00
Michael Eischer
e40943a75d
restic: remove backend usage from lock test
2024-05-18 21:38:31 +02:00
Michael Eischer
67e2ba0d40
repository: Lock requires *repository.Repository
...
This allows the Lock function to access the backend, even once the
Backend method is removed from the interface.
2024-05-18 21:38:31 +02:00
Michael Eischer
d8b184b3d3
repository: convert test helper to return *repository.Repository
2024-05-18 21:38:31 +02:00
Michael Eischer
a1ca5e15c4
migrations: add temporary hack for s3_layout
...
The migration will be removed after the next restic release anyways.
Thus, there's no need for a clean implementation.
2024-05-18 21:38:31 +02:00
Michael Eischer
34d90aecf9
migrations: move logic of upgrade_repo_v2 to repository package
...
The migration modifies repository internals and thus should live within
the repository package.
2024-05-18 21:38:31 +02:00
