07addc7d0d
Try uTP connections by default.
2011-02-18 00:43:37 +00:00
2ba3305412
When failing to connect over uTP, fall back to TCP.
2011-02-18 00:43:34 +00:00
704f984bdf
Implement atom->utp_failed and peerMgrSetUpFailed.
2011-02-18 00:43:31 +00:00
5ba2e40f79
When uTP is disabled, don't call UTP_CheckTimeouts too often.
2011-02-18 00:43:27 +00:00
25b8d08537
When uTP is enabled, open uTP connections to some peers.
...
Since we don't implement falling back to TCP yet, we're very
conservative: we only use uTP when we have good reasons to believe
the peer speaks uTP.
2011-02-18 00:43:24 +00:00
cc96b12bbc
Fix typo.
2011-02-18 00:43:21 +00:00
004d30337b
when sending PEX messages, unset the holepunch flag because we don't support holepunch.
2011-02-18 00:41:32 +00:00
f00799f80c
if we successfully finish a handshake using uTP, mark the peer as supporting uTP
2011-02-18 00:41:06 +00:00
75badcd4ab
silence compiler warning
2011-02-18 00:40:53 +00:00
71486f8c86
call UTP_RBDrained when our read buffer is empty
2011-02-18 00:40:38 +00:00
e4b4812caa
add dbgmsg statements to peer-io's uTP code
2011-02-18 00:40:22 +00:00
9626aa4506
uTP peers need tr_peerIoFlush() to work during the handshake phase.
2011-02-18 00:40:01 +00:00
f6a85cb16b
implement bandwidth limiting for uploads to uTP peers
2011-02-18 00:39:33 +00:00
3c56dbea2a
Remove more debugging messages.
2011-02-18 00:36:36 +00:00
f33a772b00
Call didWriteWrapper in utp_on_write.
2011-02-18 00:36:33 +00:00
e35d1aacaf
Don't propagate information about ut_holepunch over PEX.
...
It's not useful, says Greg.
2011-02-18 00:36:31 +00:00
c9c2ad7c57
Don't use read_enabled in get_rb_size.
...
We're no longer maintaining read_enabled, as there are simpler ways of
doing the same. Additionally, we used RBDrained incorrectly.
2011-02-18 00:36:27 +00:00
77c034122e
Revert "Maintain information about enabled/disabled I/O."
...
This reverts commit 604f8fd10db747e57d8710cc53326c0e114ad32c.
2011-02-18 00:36:24 +00:00
c9a7becf87
Remove debugging messages.
2011-02-18 00:36:21 +00:00
88f4eac81f
Implement outgoing uTP connections.
2011-02-18 00:36:19 +00:00
456dbdd935
Export uTP send_to callback.
2011-02-18 00:36:16 +00:00
11114a74c0
Fix peerIoReconnect for uTP sockets.
2011-02-18 00:36:12 +00:00
dae7db8e10
Implement pacing of reads.
...
This should cause uTP sockets to respect read bandwidth limits. I'm not so
sure about the values we return for the read buffer size -- perhaps we
should allow some slack for network latency?
2011-02-18 00:36:09 +00:00
d347f5ada4
Maintain information about enabled/disabled I/O.
2011-02-18 00:36:07 +00:00
236fb3d9d6
Set the read buffer of UTP sockets to a well-defined value.
2011-02-18 00:36:05 +00:00
80677b3730
Compute accurate overhead for uTP packets.
2011-02-18 00:36:02 +00:00
51bc8d8b80
Push testig for UTP enabled further down.
...
There's no need to test for DHT/uTP being enabled in tr-udp. The DHT
will silently discard any packets directed at the wrong session (see the
beginning of dhtCallback). As to uTP, we need to grok uTP packets
to close any remaining connections after we disabled uTP, so it's better
to participate in uTP, just reject any incoming connections.
2011-02-18 00:35:56 +00:00
4f50c5dda4
Fix typo.
2011-02-18 00:35:54 +00:00
9dca338032
make a note that we need to implement UTP_GetGlobalUTPBytesSent in libtransmission
2011-02-18 00:33:54 +00:00
3f1b060241
(trunk T) add preliminary enable/disable toggles in daemon, gtk, and qt clients. 'preliminary' because this may be widened to a tri-state of inabled, disabled, and incoming only
2011-02-18 00:33:29 +00:00
c4b1d1e6c5
(trunk libT) add C and RPC API for getting/setting uTP enabled flag
2011-02-18 00:33:11 +00:00
3a7806a7cc
(trunk libT) silence compiler warnings
2011-02-18 00:32:39 +00:00
7df7d34f6d
automake/autoconf; #includes in libtransmission
2011-02-18 00:32:19 +00:00
01f5a8b093
import libutp into third-party/ and plug it in to autoconf, automake
2011-02-18 00:31:49 +00:00
130006fcb1
Propagate uTP and ut_holepunch information over PEX.
2011-02-18 00:24:48 +00:00
5a2710c9da
Use dummy callbacks in peerIoReconnect.
2011-02-18 00:24:45 +00:00
44e6e4a8f2
Tweak dummy callbacks.
...
Don't abort, just log a message and continue.
2011-02-18 00:24:40 +00:00
4d5f8dbb92
Don't call UTP_Close multiple times.
...
Greg says it's evil.
2011-02-18 00:24:36 +00:00
bd0ea13701
(gtk) Add tooltip for uTP peers.
2011-02-18 00:24:33 +00:00
eb715e8018
Shutdown UTP socket on short write.
2011-02-18 00:24:30 +00:00
c9bbab05ee
Schedule a uTP write in peerIoWriteBuf.
2011-02-18 00:24:28 +00:00
1090e5a262
Complete the uTP callbacks.
2011-02-18 00:24:22 +00:00
6313eb4703
Add dummy UTP callbacks.
...
Libutp will sometimes call our callbacks after we called UTP_Close,
notably to notify us of the UTP_STATE_DESTROYING state change, but
also, for some reason, to ask us about our read buffer. The simplest
way to avoid issues with that is to switch to a second set of callbacks.
2011-02-18 00:24:18 +00:00
5563729d61
Add assertions to libevent callbacks.
...
They should never be called with a UTP socket.
2011-02-18 00:24:15 +00:00
18f1ddb7aa
First pass at uTP callbacks.
2011-02-18 00:24:13 +00:00
1cfa2ac38b
Update tr-utp.c to be compatible with libevent2.
2011-02-18 00:24:11 +00:00
5ad27d82cf
Fix io_dtor for uTP sockets.
2011-02-18 00:24:09 +00:00
87d1f5ca34
Check for UTP timeouts every 50ms or so.
...
Greg says that works for them.
2011-02-18 00:24:04 +00:00
7741151c48
Accept UTP connexions.
2011-02-18 00:23:58 +00:00
8599d7c037
Modify peer-io to work with UTP sockets.
...
This is not supposed to work yet -- it just adds new fields to the data
structures to get the UTP code to compile.
2011-02-18 00:23:51 +00:00
Juliusz Chroboczek